Abstract:In general, only in tangential direction, friction motion between blade dampers is concerned for vibration analysis of mistuned bladed disk. However, in practical, excitation acting on blades inevitably causes normal movement at friction interface due to the existence of angle between excitation force and contact surface. This fact leads to a variation of normal force or even a result of contact separation, which determine the maximum static friction for tangential frictional vibration. In order to assess the realistic nonlinear forced vibration of mistuned disk assemblies subjected to actual excitation with nonlinear friction and contact, an efficient method is developed by using large-scale finite element model and two-dimensional friction model. In the proposed paper, attentions are paid on the realistic coupled vibration and the impact of variable normal vibration on forced response to a traveling wave excitation. Three types of mistuned parameters, including tangential stiffness of friction surface, initial shroud gap (corresponding to preload normal force), and structural stiffness of blades are taken into account for analyzing the effect of mistuning on the coupling vibration, especially for cases of contact separation. Furthermore, by means of curve fitting of amplitude variation of normal forces, the dependence of friction motion of bladed disk studied at circumferential resonance on variation of axial displacement, even with contact separation involved, is addressed. The results show a complex nonlinear vibration with friction and contact, especially a complex multiple unstable vibration observed with repeated nonlinear snap at circumferential resonance for the cases of contact separation. With regard to a small initial normal force, a large amplitude value of force variation can greatly reduce the maximum response amplitude for mistuned blades, which is worth to pay attentions for the vibration analysis of bladed disk with nonlinear friction and contact.

Multistage Coupling of Eight Mistuned Bladed Disk on a Solid Shaft: Part 1—Free Vibration Analysis

Reduced Order Models and Coupling Characteristics of the Mistuned Blade-Disk-Shaft Integration Rotor

Reduced Order Modeling and Vibration Analysis of Mistuned Bladed Disk Assemblies With Shrouds

Vibration Analysis of Mistuned Damped Blades with Nonlinear Friction and Contact

Nonlinear Dynamics Analysis Of Mistuned Turbine Bladed Disks With Damped Shrouds

Multi-mode vibration attenuation of mistuned bladed disks by frictional tuned mass dampers array

The coupled vibration in a rotating multi-disk rotor system with grouped blades

Investigation on the Vibration Localization of Mistuned Bladed Disk with Frictional Contact

Vibrational Response Analysis of Rotating Mistuned Bladed-Disk Using a Deconvolution Method Based on Blade Tip Timing

Investigation on the parameter sensitivity of bladed assemblies undergoing mistuning features

Coupling Vibration Mechanism of Multistage Blisk-Rotor System with Blade Crack

Modelling and vibration evaluations of rotational mistuning-connecting disk-drum coupling structures with partial hard-coating damping treatment

Nonlinear Dynamics and Stability Analysis of a Multi-Disk Rotor-Bearing System with Flexible Coupling Misalignment

Coupled Shaft-Torsion and Blade-Bending Vibrations of a Rotating Shaft–Disk–Blade Unit

Multi-scale Contact Induced Period-Doubling Vibrations in Rotor Systems: Numerical and Experimental Studies

The Amplification of Vibration Response Levels of Mistuned Bladed Disks: Its Consequences and Its Distribution in Specific Situations

Theoretical and experimental study on the dynamic response of multi-disk rotor system with flexible coupling misalignment

A Reduced Order Approach for the Vibration of Mistuned Bladed Disk Assemblies

Dynamic characteristics of mistuned bladed disk system under rub-impact force

Vibration of a Misaligned Rotor System with Asymmetric Shaft Stiffness

Bifurcation and Chaos of a Bladed Overhung Rotor with Two Disks Supported on a Centralized Squeeze Film Damper