Abstract:Abstract To enable accurate characterization of the mechanical behavior of materials at the micro-scale, e.g., in micro-systems, experiments are required that are representative of the actual (often multi-axial) loading conditions to which these materials are subjected during fabrication and operation. Equally important is the acquisition of mechanical data in the form of multi-axial force measurements, and the measurement of kinematics by in-situ microscopic techniques. To this end, a micro-mechanical testing rig is here realized using commercially available piezoelectric actuators. It is shown that the setup measures forces with a resolution of $\sim 0.3$ ∼ 0.3 [mN] in the x - and y -directions, and $\sim 50$ ∼ 50 [mN] in the z -direction, over a range of 5 [N], yielding a high dynamic (force) range. Furthermore, displacements can be imposed with a resolution of $\sim 1$ ∼ 1 [nm] over a range of 200 [ μ m], in all three directions ( x , y , z ). The setup is compact, vacuum compatible, and specimens are loaded on top of the setup so that the field of view is unobstructed, allowing for in-situ testing with optical and scanning electron microscopy, and optical profilometry. A generic method is developed for extracting quasi-static forces from the piezoelectric actuators. Furthermore, challenges raised from the use of commercial actuators, for which the public technical specifications are generally incomplete, are overcome and the solution strategy is described. Proof-of-concept experiments on flexible, organic, light-emitting diodes demonstrate the potential of the setup to provide rich micro-mechanical data in the form of tri-axial force and displacement measurements. The commercial availability of the piezoelectric actuators, combined with the proposed engineering solutions lead to a generally accessible micro-mechanical test setup to investigate small-scale specimens under realistic, multi-axial loading conditions.

Design of a Microscale Optomechanical Load Cell for Micro-/Nanostructured Materials Testing Applications

Analysis and Optimization of a Novel Laterally Deformable Optical NEMS Grating Transducer

An integrated push-to-pull micromechanical device: Design, fabrication, and in-situ experiment

A Multiscale Material Testing System for In Situ Optical and Electron Microscopes and Its Application

Optimal Design of A Cantilever-Based Sensor for Measuring Micro-Forces

Development Of The Micro-D Is Placement Amplifier For A Novel Tester Measuring Mechanical Properties Of Mems Materials

A MEMS dynamic mechanical analyzer for in situ viscoelastic characterization of 3D printed nanostructures

Micro-scale fiber-optic force sensor fabricated using direct laser writing and calibrated using machine learning.

A novel technique of microforce sensing and loading

Three-dimensional printed microcantilever with mechanical metamaterial for fiber-optic microforce sensing

An Optical Probe Stage and Its Applications in Mechanical Behavior Measurements of Micro-Objects and Thin Films

MEMS Device for Quantitative in Situ Mechanical Testing in Electron Microscope

Optical diffraction for measurements of nano-mechanical bending

Optomechanical Soft Metamaterials

Design, Prototyping, and Characterization of a Micro-Force Sensor Intended for Tissue Assessment in Confined Spaces

Microelectromechanical Systems for Nanomechanical Testing: Electrostatic Actuation and Capacitive Sensing for High-Strain-Rate Testing

Mechanical Characterization Device For In Situ Measurement Of Nanomechanical Properties Of Micro/Nanostructures

A hybrid on-chip optomechanical transducer for ultrasensitive force measurements

Probe-Type Microforce Sensor for Mirco/Nano Experimental Mechanics

Characterization of radiation pressure and thermal effects in a nanoscale optomechanical cavity

An In-Situ, Micro-Mechanical Setup with Accurate, Tri-Axial, Piezoelectric Force Sensing and Positioning