Abstract:Abstract In view of the large scientific and technical interest in the MEMS accelerometer sensor and the limitations of capacitive, resistive piezo, and piezoelectric methods, we focus on the measurement of the seismic mass displacement using a novel design of the all-optical sensor (AOS). The proposed AOS consists of two waveguides and a ring resonator in a two-dimensional rod-based photonic crystal (PhC) microstructure, and a holder which connects the central rod of a nanocavity to a proof mass. The photonic band structure of the AOS is calculated with the plane-wave expansion approach for TE and TM polarization modes, and the light wave propagation inside the sensor is analyzed by solving Maxwell’s equations using the finite-difference time-domain method. The results of our simulations demonstrate that the fundamental PhC has a free spectral range of about 730 nm covering the optical communication wavelength-bands. Simulations also show that the AOS has the resonant peak of 0.8 at 1.644μm, quality factor of 3288, full width at half maximum of 0.5nm, and figure of merit of 0.97. Furthermore, for the maximum 200nm nanocavity displacements in the x - or y -direction, the resonant wavelengths shift to 1.618μm and 1.547μm, respectively. We also calculate all characteristics of the nanocavity displacement in positive and negative directions of the x -axis and y -axis. The small area of 104.35 μm 2 and short propagation time of the AOS make it an interesting sensor for various applications, especially in the vehicle navigation systems and aviation safety tools.

Membrane-Based Optomechanical Accelerometry

Monolithic Integrated Cavity Optomechanical Accelerometer Based on Push-Pull Photonic Crystal Zipper Cavity

A Chip-Scale Sub-Mu G/Hz(1/2) Optomechanical Dc Accelerometer At The Thermodynamical Limit

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Single Chip-Based Nano-Optomechanical Accelerometer Based on Subwavelength Grating Pair and Rotated Serpentine Springs

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

A Compact Micromachined Interferometric Accelerometer Based on the Diffraction Grating

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

Optical Design and Analysis of a High Resolution MOEMS Accelerometer Based on Diffraction Grating

A microchip optomechanical accelerometer

Parametrically driven inertial sensing in chip-scale optomechanical cavities at the thermodynamical limits with extended dynamic range

High accuracy, high dynamic range optomechanical accelerometry enabled by dual comb spectroscopy

Characterization and Testing of a Micro-g Whispering Gallery Mode Optomechanical Accelerometer

Orientation-sensed optomechanical accelerometers based on exceptional points

A microelectromechanically controlled cavity optomechanical sensing system

A Seismic-Grade Optical MEMS Accelerometer with Force Feedback Control

A New High-Precision Micro-Accelerometer Based on Optomechanical System

A Novel All-Optical Sensor Design Based on a Tunable Resonant Nanocavity in Photonic Crystal Microstructure Applicable in MEMS Accelerometers

Intrinsically accurate sensing with an optomechanical accelerometer

Silicon-Based Zipper Photonic Crystal Cavity Optomechanical System for Accelerometers