Abstract:This paper describes the design, fabrication, and testing of an integrated packaged sensor that is composed of a micro resonant accelerometer and a temperature sensor. The resonant accelerometer with differential configuration consists of double quartz resonators and a silicon substrate. When acceleration is applied along the sensing axis, the inertial force induced by the proof mass will transfer force to the resonators, which causes an opposite frequency shift of the dual quartz resonators. The loaded acceleration can be measured through detecting the differential frequency shift. The symmetric differential configuration response to spurious effects of thermal loading and inelastic effect causing prestress in the resonators is similar, which can be reduced by detecting the differential frequency, effectively. However, during the manufacture and packaging process, the otherness of residual stress in two quartz resonators results in that the response of resonators to temperature variation is not strictly the same. In other words, this temperature drift cannot be eliminated by the structure design. Thus, a temperature sensor and an accelerometer were packaged in a shell together. These novel integrated sensors can measure acceleration and temperature simultaneously. With the testing temperature data, a novel temperature compensation that is a combination of the variable coefficient regression and least squares support vector machine is used for improving the performance of the accelerometer. By means of this compensation and field programmable gate array, a real-time and online compensation is achieved. The tumble testing results indicate that the sensitivity of the accelerometer is ∼16.97 Hz/g. With the temperature compensation, the output drift of the scale factor is improved by 0.605 Hz/g in the full temperature range, which is from 0.072 Hz/g to 0.015 Hz/g. The drift of zero bias is improved from 345 mg to 1.9 mg.

Research on Temperature Property of Piezoelectric Vibration Accelerometer Based on Cymbal Transducer

Temperature Compensation Method for MEMS Accelerometer Based on Resonant Frequency

The Analysis of Temperature Effect and Temperature Compensation of Moems Accelerometer Based on A Grating Interferometric Cavity

CYMBAL PIEZOCOMPOSITES FOR VIBRATION ACCELEROMETER APPLICATIONS

Magnitude Versus Frequency Performance of Vibration Acceleration Sensor Based on Cymbal Transducer

Non-linear Error Compensation of Voltage Sensitivity for Vibration Accelerometer Based on Cymbal Transducer

Study of the Identification for the Static Temperature Model and the Method for Compensating Temperature of Pendulous Accelerometer

Research progress on high temperature piezoelectric acceleration sensor

An Improved Difference Temperature Compensation Method for MEMS Resonant Accelerometers

Thermo-electro-mechanical Synergistic Effect on the Actuation Performance of Piezoelectric Stack

Research Status and Development Trend of Piezoelectric Accelerometer

Design of a Piezoelectric Accelerometer with High Sensitivity and Low Transverse Effect

An Integrated Packaged Resonant Accelerometer with Temperature Compensation

A MEMS Resonant Accelerometer with High Performance of Temperature Based on Electrostatic Spring Softening and Continuous Ring-Down Technique

A piezoresistive micro-accelerometer with high frequency response and low transverse effect

Vibration and Temperature Measuring Experiments on Multilayer Piezoelectric Actuator

High-Temperature SiC Piezoresistive Accelerometer Fabricated by Femtosecond Laser

Piezoelectric Accelerometer for High Temperature (1300°C) Sensing

Research on the Influence of Temperature of the Piezoelectric Ceramic Embedded in Concrete to the Energy of Acoustic Signal

Research on Stacked Piezoelectric Cymbal Vibrator.

Temperature insensitive design of MEMS resonant accelerometer