Abstract:In a low-temperature environment, the actuation performance of the piezoelectric stack results from the synergic action of the thermo-electro-mechanical field; the actuation performance is influenced by the change in temperature, compressive preload, and excitation voltage. A special and novel instrumentation system is proposed and developed in this study to measure the relationship between the actuation performance of the piezoelectric stack and the change in temperature, preload, and voltage. The bending strain of the cantilever beam driven by the piezoelectric stack reflects its actuation performance, and the corresponding theoretical model is established to optimize the experimental conditions and maximize the strain and signal-to-noise ratio. Based on the experimental results, it can be seen that the actuation performance of the piezoelectric stack increases linearly with the excitation voltage under different temperatures and preload conditions. The static actuation performance increased by 79%-90% when the prestress increased from 0 to 6 MPa, corresponding to a decrease of 15%-30% when the temperature decreased from 20 to -70 °C, and the dynamic actuation performance decreased with an increase in the frequency of the excitation voltage. Consequently, the design methods and ideas are informative to develop an instrumentation system that can measure the influence of thermo-electro-mechanical synergistic effects on the actuation performance of piezoelectric stacks under different temperatures, preloads, and voltages.

Vibration and Temperature Measuring Experiments on Multilayer Piezoelectric Actuator

Low-temperature co-fired PZNN-PZT multilayer piezoelectric ceramics with excellent electrical and bending properties

Investigation on Microscopic Mechanisms of High-Curie Temperature PMN-PH-PT Piezoelectric Ceramics

Composition Design of PMN-PH-PT Piezoelectric Ceramics for High-Temperature Actuator Applications

Thermo-electro-mechanical Synergistic Effect on the Actuation Performance of Piezoelectric Stack

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Low temperature sintering of Li2CO3 added Pb(Ni1/3Nb2/3)-Pb(Zr,Ti)O3 ceramics with high piezoelectric properties

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

The electrical properties of low-temperature sintered 0.07Pb(Sb1/2Nb1/2)O3-0.93Pb(Zr Ti1−)O3 multilayer piezoceramic actuator

Enhanced Piezoelectric Performance and Thermal Stability of Alkali Niobate-Based Ceramics

Large strain with broad temperature insensitivity in PZT-PNN multilayer piezoactuators

Piezoelectric enhancement of 0.6Pb(Zr,Ti)O3–0.4Pb(Ni1/3Nb2/3)O3 ceramics with artificial MPB engineering

Effects of ZnO/Li2O codoping on microstructure and piezoelectric properties of low-temperature sintered PMN–PNN–PZT ceramics

Low‐temperature sintering Sm‐doped PMN–PZ–PT multilayer ceramic actuator with high strain and temperature stability

Achieving Both High D 33 and High T C in Low-Temperature Sintering Pb(Ni 1/3 Nb 2/3 )O 3 –pb(mg 1/2 W 1/2 )O 3 –pb(zr 0.5 Ti 0.5 )O 3 Ceramics Using Li 2 CO 3

Investigation of phase structure and electrical properties of PMN-PSN-PNN–PZT ceramics with different PNN content

Low-temperature Sintered Bi0.5Na0.5TiO3-SrTiO3 Incipient Piezoceramics and the Co-Fired Multilayer Piezoactuator Thereof

The High Piezoelectric Properties and High Temperature Stability in Mn Doped Pb(Mg0.5W0.5)O3-Pb(Zr,Ti)O3 Ceramics

Study on Fabrication and Properties for a Novel Micro-actuated Element

Temperature dependence of piezoelectric properties of the binary Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals prepared by continuous feeding Bridgeman method

Enhanced Piezoelectricity and Excellent Thermal Stabilities in Nb–Mg Co-Doped CaBi4Ti4O15 Aurivillius High Curie Temperature Ceramics