Abstract:Over the last decades, notable progress is achieved in (K, Na)NbO3 (KNN)-based lead-free piezoceramics. However, more studies are conducted to increase its piezoelectric charge coefficient (d33). For actuator applications, piezoceramics need high electric-field induced strain under low electric fields while maintaining exceptional temperature stability across a wide temperature range. In this study, this work developes Li/Sb-codoped KNN (LKNNS) ceramics with high electrostrain by defect engineering and domain engineering. A remarkable strain of 0.43%, along with a giant d33* value of 2177 pm V-1, is attained in the LKNNS ceramic at 20 kV cm-1. The ceramic exhibits a minimal performance decrease of less than 15% over a temperature range from room temperature to 150 °C. The exceptional strain is attributed to the presence of A-site vacancy-oxygen vacancy ( V A ' - V O • • ${\mathrm{V}}_{\mathrm{A}}^{{\prime}}{\mathrm{ - V}}_{\mathrm{O}}^{{\mathrm{ \bullet \bullet }}}$ ) defect dipoles and the increase in nano-domains. The hierarchical domain configuration and V A ' - V O • • ${\mathrm{V}}_{\mathrm{A}}^{{\prime}}{\mathrm{ - V}}_{\mathrm{O}}^{{\mathrm{ \bullet \bullet }}}$ defect dipoles impede the switched domains from reverting to their original state as temperature increases, furthermore, the elongated dipole moments of V A ' - V O • • ${\mathrm{V}}_{\mathrm{A}}^{{\prime}}{\mathrm{ - V}}_{\mathrm{O}}^{{\mathrm{ \bullet \bullet }}}$ caused by rising temperatures compensate for strain reduction results in exceptional temperature stability. This study provides a model for designing piezoelectric materials with exceptional overall performance under low electric fields and across a wide temperature range.

Large strain with broad temperature insensitivity in PZT-PNN multilayer piezoactuators

The electrical properties of low-temperature sintered 0.07Pb(Sb1/2Nb1/2)O3-0.93Pb(Zr Ti1−)O3 multilayer piezoceramic actuator

Composition Design of PMN-PH-PT Piezoelectric Ceramics for High-Temperature Actuator Applications

Low-temperature co-fired PZNN-PZT multilayer piezoelectric ceramics with excellent electrical and bending properties

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Temperature-insensitive strain response in Bi(Zn1/2Ti1/2)O3–PbZrO3–PbTiO3 ferroelectric ceramics simultaneously with low hysteresis for high-precision actuators application

Temperature-insensitive PMN-PZ-PT ferroelectric ceramics for actuator applications

Low‐temperature sintering Sm‐doped PMN–PZ–PT multilayer ceramic actuator with high strain and temperature stability

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Temperature-Insensitive (K,Na)Nbo3-Based Lead-Free Piezoactuator Ceramics

Large strain and temperature-insensitive piezoelectric effect in high-temperature piezoelectric ceramics

Low-temperature Sintered Bi0.5Na0.5TiO3-SrTiO3 Incipient Piezoceramics and the Co-Fired Multilayer Piezoactuator Thereof

Low temperature sintering of Li2CO3 added Pb(Ni1/3Nb2/3)-Pb(Zr,Ti)O3 ceramics with high piezoelectric properties

Temperature-dependent electrical properties of 0.5Pb(NiNb)O–(0.5 − )PbTiO–PbZrO piezoceramics near the morphotropic phase boundary

Temperature‐Insensitive (K,Na)NbO<sub>3</sub>‐Based Lead‐Free Piezoactuator Ceramics

Piezoelectric enhancement of 0.6Pb(Zr,Ti)O3–0.4Pb(Ni1/3Nb2/3)O3 ceramics with artificial MPB engineering

Ultra‐high‐temperature piezoelectric responses and ultra‐high thermal stability of piezoelectricity in ceramic PbZr 0.54 Ti 0.46 O 3

Improved in situ high temperature piezoelectric performance of BiScO3-PbTiO3-Pb(Sn1/3Nb2/3)O3 ceramics for actuator applications

Large Electrostrain in Low‐temperature Sintered NBT‐BT‐0.025FN Incipient Piezoceramics

Pb(In1/2Nb1/2)O3-PbZrO3-PbTiO3 ternary ceramics with temperature-insensitive and superior piezoelectric property

High Temperature-Insensitive Electrostrain Obtained in (K, Na)NbO3-Based Lead-Free Piezoceramics