Abstract:On the road of lead-free piezoelectric ceramics into practical applications, the study of Ni-internal-electrode (K, Na)NbO3-based (KNN-based) multilayer actuators (MLAs) is an important part, possessing the advantages of environmentally friendly and low cost. The Ni-internal-electrode KNN-based MLAs with different layer numbers and layer thicknesses were fabricated via the tape casting method and sintered in the reducing atmosphere. The piezoelectric layers consist of the main KNN-based phase and a trace amount of second phase Mn4Nb2O9. The element diffusion between the Ni electrodes and KNN-based grains is tiny, indicating that Ni is suitable for co-firing with KNN-based ceramics. After sintering, the compressive stress perpendicular to the thickness direction and the "relative tensile stress" parallel to the thickness direction are retained in the MLAs, bringing influences on the piezoelectric and dielectric properties of KNN-based materials. Compared with the bulk ceramics, the prepared MLAs significantly reduce the driving voltages and increase the displacement outputs, which are more applicable to the scenarios of miniaturization and portability. Particularly, the 46-layer actuator shows high displacements of 1580 and 2737 nm under the voltages of 100 and 200 V, respectively. However, the inverse piezoelectric coefficient d(33)* for each layer of MLAs is still lower than that of the bulk ceramics, indicating that the piezoelectric properties of the KNN-based materials are suppressed. To give full play to the piezoelectric properties of KNN-based materials, more attentions should be paid to the design of reasonable electrode structure and the development of internal electrode paste for MLAs.

Multilayer technologies for piezo-ceramic materials

Lead Free Multilayer Piezoelectric Actuators by Economically New Approach

A low-cost multilayer piezoelectric actuator for ultrasonic motor stator driving fabricated by a low-temperature co-fired ceramic process

Base Metal Co-Fired Multilayer Piezoelectrics

Tiny Piezoelectric Multi-Layered Actuators with Application in a Compact Camera Module-Design, Fabrication, Assembling and Testing Issues

Process and Analysis of Multilayer Piezoelectric Ceramic for Micro-motor

KNN‐based Piezoelectric Ceramic Multilayer Actuators with Ni Internal Electrodes

High-performance (K,na)nbo3-Based Multilayer Piezoelectric Ceramic Actuators with Nickel Inner Electrodes

Co-fired Lead-Free Piezoceramic Multilayer Actuators with Ultrahigh Electro-Strain and Remarkable Comprehensive Properties

Analysis and Experimental Research of a Multilayer Linear Piezoelectric Actuator

Low‐temperature sintering Sm‐doped PMN–PZ–PT multilayer ceramic actuator with high strain and temperature stability

The electrical properties of low-temperature sintered 0.07Pb(Sb1/2Nb1/2)O3-0.93Pb(Zr Ti1−)O3 multilayer piezoceramic actuator

Finite Element Analysis and Design of Monolithic Multilayer Piezoelectric Micromanipulator

Low-temperature sintered PMnS–PZT multilayer-ceramic for nano-step piezomotor application

Design and Experiments of a Miniature Piezoelectric Actuator Using a Multilayer PZT Bimorph

Low-temperature co-fired PZNN-PZT multilayer piezoelectric ceramics with excellent electrical and bending properties

An Analytical Model for Electrode–ceramic Interaction in Multilayer Piezoelectric Actuators

Influence of Buffer Layers on the Piezoelectric Property of ZnO Film

Structure and Electrical Properties of PMN-PZT Micro-Actuator Deposited by Tape-Casting Process

An electrode analysis for multilayer ceramic actuators

Mechanical Quality Factor of Multilayer Piezoelectric Ceramic Transducers