Abstract:A potential application for Pb(Mg1/3Nb2/3)O3-Pb(Zr0.52T{i}0.48)O3 (PMN-PZT) piezoelectric material is micro positioning and actuation for hard disk drives. And this material was developed and the processing of a piezoelectric multilayer element for stacking and co-firing Ag/Pd electroded tape casting layers was investigated. The formation mechanisms of PMN-PZT ternary solid solution prepared by the mixed oxides techniques has been characterized by differential thermal analysis (DTA) and thermal gravimetric analysis (TGA). The sintered microstructure and composition of the PMN-PZT multilayer elements were investigated by scanning electron microscope (SEM), and X-ray spectrometer (EDX). The data from DTA/TGA stress the importance of a slow debonding from room temperature to 500 ∘C. The joining of the electrode to the PMN-PZT layer confirms that the internal electrodes are well defined and is well interconnected to the PMN-PZT layer. The ferroelectric polarization-electric (P-E) hysteresis loops of the piezoelectric films were also measured. The remanent polarization and coercive field calculated from the P-E curves decreased with decreasing the number of PMN-PZT multilayer films from 10-layer to 4-layer. After that, a novel U-type micro-actuator attached to each side via piezoelectric elements was also practically measured by laser Doppler vibrometer in order to testify the driving mechanics of it. The highest displacement/voltage sensitivity of 1.496 μm/±20 V is achieved by the micro-actuator with two 10-layer elements. The corresponding resonance frequency of the sway mode is high at 12 kHz.

Microstructures of the monomorph piezoelectric ceramic actuators with functional gradients

Microdisplacement Characteristics and Microstructures of Functionally Graded Piezoelectric Ceramic Actuator

EPMA and TEM investigations on the interdiffusion layer of the PNN/PZT functionally gradient piezoelectric ceramics

Crystal structure and actuation mechanisms in morphotropic phase boundary Pb(Zn 1/3 Nb 2/3 )O 3 ‐Pb(Zr 1/2 Ti 1/2 )O 3 piezoelectric ceramic

Interdiffusion reaction in the PZT/PNN functionally gradient piezoelectric ceramic materials

Operational Principle, Fabrication and Displacement Characteristics of a Functionally Gradient Piezoelectric Ceramic Actuator

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Composition Design of PMN-PH-PT Piezoelectric Ceramics for High-Temperature Actuator Applications

Effect of the Interdiffusion Reaction on the Compatibility in PZT/PNN Functionally Gradient Piezoelectric Materials

Low-temperature co-fired PZNN-PZT multilayer piezoelectric ceramics with excellent electrical and bending properties

Tracking high-performance Pb(Ni1/3Sb2/3)O3–Pb(Zr0.48Ti0.52)O3 piezoelectric ceramics near morphotropic phase boundary

Investigation of phase structure and electrical properties of PMN-PSN-PNN–PZT ceramics with different PNN content

Structure and Electrical Properties of PMN-PZT Micro-Actuator Deposited by Tape-Casting Process

Systematic study of structure and piezoelectric properties of Pb(Ni 1/3 Nb 2/3 )O 3 ‐PbTiO 3 by in situ synchrotron diffraction

Dielectric, Piezoelectric and Dc Bias Characteristics of Bi-doped PZT Multilayer Ceramic Actuator

Actuators, Piezoelectric Ceramics and Functionally Gradient Materials

Defect dipole stretching enables ultrahigh electrostrain

Enhancement of the piezoelectric property in PMN-PZT/PZT thin films

Study on Fabrication and Properties for a Novel Micro-actuated Element

Fabrication and Evaluation of Porous Piezoelectric Ceramics and Porosity–Graded Piezoelectric Actuators

Piezoelectric enhancement of 0.6Pb(Zr,Ti)O3–0.4Pb(Ni1/3Nb2/3)O3 ceramics with artificial MPB engineering