Abstract:A two-to-three (2/3)-level dual-active-bridge (DAB) converter is a promising dc-dc converter for medium- and high-voltage applications. That is due to its advantages like high power density, galvanic isolation, and capability of withstanding higher voltage ratings compared to the two-level DAB converters. However, the open-circuit fault (OCF) is critical for the 2/3-level DAB converters, resulting in various negative effects, e.g., dc bias, overshoot current, and capacitor voltage imbalance. To address these issues, it is necessary to develop fault diagnosis and fault-tolerant control strategies. This article, thus, proposes a method to identify the faulty switch based on the dynamic characteristics when the OCF occurs. The midpoint voltages of the neutral-point-clamped bridge arms are employed as the fault diagnosis signals, where the faulty switch can be identified accurately based on the mean values and duty cycles of the midpoint voltages. Subsequently, a fault-tolerant control scheme based on a complementary-switch-blocking method is proposed. In this scheme, when the OCF occurs on one switch, the gate-driving signal of its complementary switch is blocked, and the OCF negative effects, e.g., dc bias, overshoot current, and unbalanced capacitor voltages, can be alleviated significantly. Furthermore, the power transfer capability of the 2/3-level DAB converters is enhanced with the proposed scheme compared to the traditional bypass-arm method. Finally, experimental tests are carried out to verify the theoretical analysis.

The Tolerance Control Method Based on Zero-Sequence Circulating Current Suppression for Parallel T-type Three-Level Rectifiers

Fault-Tolerant Operation for Single-Phase Open Circuit of Dual-Armature Flux-Switching Permanent Magnet Machine by Connecting Neutral Points

A Novel Neutral Current Control Strategy for the Three-Phase Four-Wire Boost PFC Converter

An Improved Finite-Time Control Strategy for Zero-Sequence Circulating Current Suppression of Parallel Three-Level Rectifiers

A fault-tolerant T-type three-level inverter system

Open-Circuit Fault Diagnosis and Tolerant Control for 2/3-Level DAB Converters

Open-Circuit Fault Analysis and Fault-Tolerant Control for 2/3-Level DAB Converters

A Unified Fault Tolerant Control and Neutral-Point Voltage Balance Strategy for Three-Level T-Type Inverters under Double Signal PWM

Power Sharing and ZSCC Elimination for Parallel T-Type Three-level Rectifiers Based on Model-Free Predictive Control

Fault-tolerant Control Strategy with Reduced Switching Frequency for Inverter-Based Fault in Open-Winding PMSM System

Zero-Sequence Current Suppression Method for Fault-Tolerant OW-PMSM Drive with Asymmetric Zero-Sequence Voltage Injection

Three-phase Three-level PFC Rectifier Under Single-Cycle Control

A Full-Range and High-Dynamic Control Method of Neutral Point Potential for Parallel Three Level Inverters Considering Zero-Sequence Circulating Current

Nonlinear Modeling and Improved Suppression of Zero-Sequence Circulating Current for Parallel Three-Level Inverters

Research on Fault Tolerant Control Method of Three-Level TNPC Inverter

Recovering Partial Three-Level Operation in a T-Type Inverter with Fault Management Redundant Unit

Control strategy of transformer coupling solid state fault current limiter and its experimental study with capacitance load

An Improved Data-Driven Based Model Predictive Control for Zero-Sequence Circulating Current Suppression in Paralleled Converters

A Control Method for the Interleaved Active Power Filter with SiC-MOSFETs

Fault-Tolerant Control of Dual-Three-Phase PMSM under Open-Phase Fault Based on Two-Individual Current Control

Coordinated Control Strategy of Zero-Sequence Circulating Currents and Neutral-Point Potential for Parallel Hybrid Three-Level ANPC Converters