Abstract:In this paper, a novel dual-set permanent magnet (PM) flux-switching (DSPM-FS) machine is proposed for the improvement of torque density and fault-tolerance capability. Originating from a flux-switching permanent magnet (FSPM) machine with a U-shaped PM array, fault-tolerance stator teeth are first introduced in the stator slots to prevent the risk of short-circuit faults between coils of different phases. Subsequently, aiming to enhance the torque generation, a set of surface-mounted PM is added to the fault-tolerance teeth. Due to a parallel flux circuit, the phase flux linkage is greatly increased, further improving the no-load back electromotive force (EMF). Meanwhile, a magnetomotive force (MMF)-permeance model is established, which reveals that the amplitudes of the main working harmonics of the DSPM-FS machine are significantly elevated. Moreover, the proposed and conventional machines are comprehensively compared regarding various electromagnetic performances. Consequently, the no-load back EMF and output torque of the proposed machine are increased by 43.89% and 31.47%, respectively. Additionally, the proposed machine showcases a comparable overload performance compared to the conventional machine. Furthermore, the fault-tolerance ability and power efficiency of the proposed DSPM-FS machine also exhibit notable improvement. Finally, a prototype is fabricated and tested to verify the performance of the proposed machine.

Fault-Tolerant Operation for Single-Phase Open Circuit of Dual-Armature Flux-Switching Permanent Magnet Machine by Connecting Neutral Points

Decoupled Vector Control Scheme for Dual-Armature Flux-Switching Permanent Magnet Machines

High-Frequency Signal Injection-Based Sensorless Control for Dual-Armature Flux-Switching Permanent Magnet Machine

A Fault Tolerant Control Strategy for Dual Three-Phase PMSM under Single-Phase Open Circuit Fault Considering Inductance Asymmetry

Fault-Tolerant Control of Dual Three-Phase PMSM Based on Minimum Copper Loss under Multi-Phase Open and Open-Switch Faults

Fault-Tolerance Performance Analysis of a Five-Phase Permanent-Magnet Linear Synchronous Machine

A Novel Dual Permanent Magnet Fault-Tolerant Vernier Machine with Hybrid Stator Configuration

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

Fault Tolerant Control of Harmonic Injected Nine-Phase Flux Switching Permanent Magnet Motor Drive System

Control of Dual Three-Phase Permanent Magnet Synchronous Motor under Open Phase Fault Conditions

A Novel Doubly-Fed Flux-Switching Permanent Magnet Machine with Armature Windings Wound on Both Stator Poles and Rotor Teeth

Fault-tolerant Control Strategy with Reduced Switching Frequency for Inverter-Based Fault in Open-Winding PMSM System

Strategies for the fault-tolerant current control of a multiphase machine under open phase conditions

Fault Tolerant Control of a Multiphase Motor with Non-Sinusoidal Source under Open-Phase Conditions

Fault-tolerant stator flux oriented decoupling control for dual three-phase permanent magnet motor without diagnosis and reconfiguration

Design of Five-Phase Modular Flux-Switching Permanent-Magnet Machines for High Reliability Applications

Design of a Dual-Set Permanent Magnet Flux-Switching Machine with Enhanced Torque Density and Fault-Tolerance Capability

Fault-Tolerant Control of Dual-Three-Phase PMSM under Open-Phase Fault Based on Two-Individual Current Control

Single-phase Open-circuit Fault-tolerant Control for a Dual Five-phase Permanent Magnet Motor with Multi-operational Modes

A Fault-Tolerant Machine Based on Radial-Flux Dual Stator and Parallel Permanent-Magnet/Reluctance Structure

Fault-tolerant oriented control of modular linear switched-flux permanent magnet machine