Abstract:One of the main advantages of dual three-phase permanent magnet synchronous machines (DTP-PMSMs) is their fault-tolerant capability. However, the complex fault-tolerant controller structure, high copper loss and unneglectable torque ripple under postfault operation limit their further development. The inaccurate transmission of control signals under the open-phase fault (OPF) is considered in this article. Undesirable second-order torque ripple and 3rd order current harmonics are induced by the transmission error between the controller output voltage and the actual stator voltage according to theoretical analysis. To cope with this issue, a fault tolerant control strategy based on voltage compensation is developed for DTP-PMSMs under OPF without introducing extra complex control schemes. The current references are derived in sinusoidal forms with minimum copper loss. Only three current loops are utilized in the proposed fault-tolerant strategy, compared to four current loops under normal operation, without changing the control strategy and controller parameters. In terms of compensation performance, since the leakage inductance affects the voltage compensation, a parameter acquisition method based on sine wave current injection is proposed. The proposed strategy does not induce heavy computation burden and has a good steady-state and dynamic response. Simulation and experiment results prove the theoretical analysis and the superiority of the proposed strategy.

Fault-Tolerant Control of Dual Three-Phase PMSM Based on Minimum Copper Loss under Multi-Phase Open and Open-Switch Faults

A Fault Tolerant Control Strategy for Dual Three-Phase PMSM under Single-Phase Open Circuit Fault Considering Inductance Asymmetry

Fault-Tolerant Operation for Single-Phase Open Circuit of Dual-Armature Flux-Switching Permanent Magnet Machine by Connecting Neutral Points

Detection of Inter-Turn Short Circuit Fault for Dual Three-Phase PMSM Based on Vector Space Decomposition Scheme

Control of Dual Three-Phase Permanent Magnet Synchronous Motor under Open Phase Fault Conditions

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

Fault-Tolerant Control of Dual-Three-Phase PMSM under Open-Phase Fault Based on Two-Individual Current Control

Simple fault tolerant control of dual three-phase PMSM under one phase open-circuited condition

Fault-Tolerance Performance Analysis of a Five-Phase Permanent-Magnet Linear Synchronous Machine

Fault-tolerant Control Strategy with Reduced Switching Frequency for Inverter-Based Fault in Open-Winding PMSM System

Fault Tolerant Control of a Multiphase Motor with Non-Sinusoidal Source under Open-Phase Conditions

Optimized Fault-Tolerant Control of Dual Three-Phase PMSM Under Open-Switch Faults

Postfault Strategy for Dual Three-Phase PMSM With Reduced Current Loops Considering Leakage Inductance

Strategies for the fault-tolerant current control of a multiphase machine under open phase conditions

Open-Circuit Fault-Tolerant Control of a Six-Phase Asymmetric Permanent Magnet Synchronous Motor Drive System

Fault-Tolerant Control for Reducing Harmonic Distortion of Dual Three-Phase Permanent Magnet Synchronous Motor

An Embedded Fault-Tolerant Control Method for Single Open-Switch Faults in Standard PMSM Drives

Single-phase Open-circuit Fault-tolerant Control for a Dual Five-phase Permanent Magnet Motor with Multi-operational Modes

Fault Tolerant Control of Harmonic Injected Nine-Phase Flux Switching Permanent Magnet Motor Drive System

Fault-Tolerant Control of Five-Phase Induction Motor under Single-Phase Open

A Unified Open Switch Fault-Tolerant Control Method for Dual-Redundancy Permanent Magnet Synchronous Motor