Abstract:Journal of Composite Materials, Ahead of Print. Thermoplastic composite materials are being increasingly used in many domains, such as automotive, marine and aeronautics. This growing interest is due to the relatively good mechanical properties and the recycle-ability of these materials. In various heat assisted forming technologies, thermoplastic composites may be subjected to severe conditions such as high temperatures, complex strain paths and potentially significant strain rates. This is expected to highly influence the overall behavior of these materials and make the characterization of their mechanical behavior more complicated. In this paper, the mechanical behavior of discontinuous glass fiber reinforced polypropylene composite is investigated at temperatures going from room temperature (RT) to 120°C and strain rates ranging from quasi-static conditions to 10 s−1 by means of uniaxial tensile tests. The effect of material orientation is also investigated at RT and quasi-static strain rate of 0.001 s−1 pointing out a clear anisotropic behavior. The tensile properties including Young's modulus E, ultimate tensile strength σult and strain at failure ɛf are determined based on the Standard ISO-527 reporting an obvious sensitivity of the material to temperature and strain rate. Based on literature review, the phenomenological isotropic constitutive model of G'Sell and Jonas, originally designed for unreinforced semi-crystalline polymers, is selected to describe the mechanical behavior of the studied material. A modification of the original constitutive equation is proposed for a better representation of the overall behavior of the material at different temperature and strain rate conditions. Finally, the validity of this phenomenological law calibrated by means of the uniaxial tests, is evaluated for an equi-biaxial loading state close to that encountered by the material during heat assisted sheet forming process. The significant disagreement highlighted between numerical and experimental results proved that the uniaxial tensile tests are not sufficient to characterize the behavior of the material when a complex loading condition is imposed.

Thermochemical and Mechanical Aspects of Composite Tape Laying

Transverse squeeze flow of thermoplastic composite tape during in-situ consolidation via automated fiber placement

An experimental validation study of a numerical modeling approach to predicting post-consolidation dimensions of thermoplastic composites

Effects of thermoforming parameters and layup on unidirectional reinforced amorphous thermoplastic composite surfaces

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Numerical simulation at the micro-scale for the heat transfer modelling in the thermoplastic composites laser-assisted AFP process

A study on real-time quantitative thermal analysis of composite tapes

Temperature field of thick thermoset composites: Simulation and experimental

Autoclave manufacturing of thick composites

Multi-scale finite element simulation of the thermoforming of a woven fabric glass fiber/polyetherimide thermoplastic composite

On the temperature evolution during continuous laser-assisted tape winding of multiple C/PEEK layers: The effect of roller deformation

Temperature Field of Thick Thermoset Composite Laminates During Cure Process

The effect of laser assisted tape placement processing conditions on microstructural evolution, residual stress and interlaminar shear strength of carbon fibre/PEEK laminates

Different Production Processes for Thermoplastic Composite Materials: Sustainability versus Mechanical Properties and Processes Parameter

Temperature Distribution of Thick Thermoset Composites

Laser-assisted automated tape laying: Effects of placement rate and heated tooling on layer bonding and tensile properties

Experimental and statistical study on the effect of process parameters on the quality of continuous fiber composites made via additive manufacturing

Rheokinetic studies for in-situ monitoring of T-RTM process: Rheology coupled to dielectric analysis and FTIR spectroscopy

Thermo-visco mechanical behavior of glass fiber reinforced thermoplastic composite

A Modeling Framework for the Thermoforming of Carbon Fiber Reinforced Thermoplastic Composites

Inherent relationship between process parameters, crystallization and mechanical properties of continuous carbon fiber reinforced peek composites