Abstract:Structural aerospace composite parts are commonly cured through autoclave processing. To optimize the autoclave process, manufacturing process simulations have been increasingly used to investigate the thermal behavior of the cure assembly. Performing such a simulation, computational fluid dynamics (CFD) coupled with finite element method (FEM) model can be used to deal with the conjugate heat transfer problem between the airflow and solid regions inside the autoclave. A transient CFD simulation requires intensive computing resources. To avoid a long computing time, a quasi-transient coupling approach is adopted to allow a significant acceleration of the simulation process. This approach has been validated for a simple geometry in a previous study. This paper provides an experimental and numerical study on heat transfer in a medium-sized autoclave for a more complicated loading condition and a composite structure, a curved shell with three stringers, that mocks the fuselage structure of an aircraft. Two lumped mass calorimeters are used for the measurement of the heat transfer coefficients (HTCs) during the predefined curing cycle. Owing to some uncertainty in the inlet flow velocity, a correction parameter and calibration method are proposed to reduce the numerical error. The simulation results are compared to the experimental results, which consist of thermal measurements and temperature distributions of the composite shell, to validate the simulation model. This study shows the capability and potential of the quasi-transient coupling approach for the modeling of heat transfer in autoclave processing with reduced computational cost and high correlation between the experimental and numerical results.

Temperature field of thick thermoset composites: Simulation and experimental

Temperature Distribution of Thick Thermoset Composites

Temperature Field of Thick Thermoset Composite Laminates During Cure Process

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Prediction of the Temperature of Large Framed Mold and Curing Deformation of Composite Components in the Autoclave Process

STUDY OF TEMPERATURE DISTRIBUTION OF THICK POLYMERIC MATRIX COMPOSITES Ⅰ:SIMULATION

Thermal Management for Thermoset Automated Fiber Placement Based on Infrared Heater Structure Arrangement

Autoclave manufacturing of thick composites

A Heat-Balance Method for Autoclave Process of Composite Manufacturing

Temperature Field in the Heat Transfer Process of PEEK Thermoplastic Composite Fiber Placement

Three-dimensional Cure Simulation of Stiffened Thermosetting Composite Panels

Study on temperature gradient of ultra-thick foam sandwich composite structure during curing

Simulation and Modeling of Polymeric Composite Temperature Change During Manufactory Process

The effect of temperature field on the characteristics of carbon fiber reinforced thermoplastic composites in the laying and shaping process

Study of the curing process of carbon fiber reinforced resin matrix composites in autoclave processing

Numerical Prediction of Temperature Distribution in Thermoset Composites During Laser Curing Process

Quantitative relations between curing processes and local properties within thick composites based on simulation and machine learning

Temperature distribution analysis of carbon fiber reinforced polymer composites during self-resistance electric heating process

Design Optimization of Molds for Autoclave Process of Composite Manufacturing

Experimental validation of a quasi-transient coupling approach for the modeling of heat transfer in autoclave processing

Multi-scale finite element simulation of the thermoforming of a woven fabric glass fiber/polyetherimide thermoplastic composite