Abstract:The broadening use of carbon-fiber reinforced plastics (CFRP) in various industries has raised safety concerns. To control the hazard, infrared thermography inspection techniques, capable of large-area scanning, instantaneous imaging, and completely non-contact detection, has been increasingly adopted to detect flaws inside CFRP structures. And in practical engineering, post-processing algorithms are required to eliminate noise and enhance defect detectability after initial inspection course. However, rapid updates of infrared camera bring high-resolution thermograms yet. Whereas classic algorithms have encountered data explosion problem which led to low efficiency and engineering infeasibility. Therefore, to promote the efficiency of postprocessing algorithms, we propose equal interval sampling (EIS) method to sample raw thermal data. Two CFRP laminates with embedded artificial Teflon inserts of different sizes at different depths are inspected by a laser infrared thermography system. The obtained raw thermal videos made up of 500 frame thermal images with 512 × 640 pixels were converted to 3D thermographic data. We apply EIS to sample the data by setting different intervals. And the sampled data are fed to classic post-processing algorithms, thermal signal reconstruction (TSR) and principal component analysis (PCA), which have prevailed in processing thermographic data. Regarding different intervals of EIS as variables, the processing efficiency, and the defect detection performance of EIS-TSR and EIS-PCA are studied. The results demonstrate that EIS-TSR method fails to promote processing speed and maintain the performance of defect detection at the same time. In contrast, the EIS-PCA method attains a remarkable efficiency and intact defect detectability simultaneously, manifesting its adequacy in engineering practice.

A study on real-time quantitative thermal analysis of composite tapes

Applying optical coherence tomography to inline quality monitoring of unidirectional glass-fiber-reinforced thermoplastic tapes

A novel measurement approach based on optical coherence tomography for inline quality assessment of thermoplastic glass-fiber reinforced unidirectional tapes

Real-time Evaluating Temperature-Dependent Interfacial Shear Strength of Thermoplastic Composites Based on Stress Impedance Effect of Magnetic Fibers

3D photothermal reconstruction of subsurface defects in notched multidirectional CFRP laminates due to tensile fatigue loading

Study on Equal Interval Sampling Method Promoting Efficiency of Post-Processing Algorithms for Infrared Thermography Inspecting Carbon-Fiber Reinforced Plastics Composites

On the temperature evolution during continuous laser-assisted tape winding of multiple C/PEEK layers: The effect of roller deformation

Exploiting temperature measurements for cure monitoring of FRP composites—Applications with thermocouples and infrared thermography

Numerical simulation at the micro-scale for the heat transfer modelling in the thermoplastic composites laser-assisted AFP process

Time-Frequency Based Thermal Imaging: An Effective Tool for Quantitative Analysis

Investigation of self-heating and damage progression in woven carbon fibre composite materials, following the fibres direction, under static and cyclic loading

Thermochemical and Mechanical Aspects of Composite Tape Laying

Analysis of the Rotation Bending Test Method and Characterization of Unidirectional Carbon Fiber-Reinforced Polycarbonate Tapes at Processing Temperatures

Numerical Modelling of the Heat Source and the Thermal Response of an Additively Manufactured Composite during an Active Thermographic Inspection

Online Monitoring and Prediction of Thermo-Mechanics of AFP Based Thermoplastic Composites

Carbon fiber composites inspection and defect characterization using active infrared thermography: numerical simulations and experimental results

Thermal non‐destructive testing and evaluation for inspection of carbon fibre‐reinforced polymers

Non-Destructive Thermography Analysis of Impact Damage on Large-Scale CFRP Automotive Parts

Defect size measurement and far distance infrared detection in CFRP-concrete and CFRP-steel systems

Application of Laser Scannung Thermography and Regression Analysis to Determine Characteristics of Defects in Polymer Composite Materials

Efficient 3D temperature field prediction and visualization for AFP process analysis in composite structures