Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. Ongoing research in additive manufacturing towards structural and industrial application has led to the use of commingled roving as a manufacturing feedstock for printing high fiber volume fraction composites. The prospects of using this technology for high performance applications necessitates the need for a comprehensive experimental investigation into the effects of processing parameters on the quality of an additively manufactured composite printed from commingled roving feedstock. In this work, transverse flexure and void fraction matrix pyrolysis testing are both performed to evaluate composite quality. The transverse flexure test is a testing approach that evaluates the quality of the interfacial fiber-matrix bond while the void fraction test estimates the void content in the printed composite. A full observational study consisting of 27 different test combinations is done to investigate the effects of three different process parameters namely, temperature, pressure, and print speed across three different levels. Composite samples were made from commingled roving of E-glass and amorphous PET using an in-house built continuous fiber composite digital manufacturing system. Least squares regression analysis is performed to study the main, interaction and quadratic effects of process parameters. A statistical regression model having an R2 adjusted value of 80.1% is generated from the transverse flexure study, which is used to explain main and interaction effects and also predict performance. Response surface plots are also generated and are used to optimize process parameters which can subsequently be of help in scaling up composite manufacturing. Results show that all three process parameters are highly statistically significant at the 0.01 level of significance. Pressure * Temperature and Pressure * Printspeed are significant interaction terms. Pressure plays a weightier role when print speed is increased or temperature is decreased as it closes more voids that would ordinarily have been introduced because of drop in polymer melt viscosity. Micrographic analysis is also performed.

Effects of thermoforming parameters and layup on unidirectional reinforced amorphous thermoplastic composite surfaces

Effects of Process Parameters in Thermoforming of Unidirectional Fibre-Reinforced Thermoplastics

Effects of Thermoforming Parameters on Woven Carbon Fiber Thermoplastic Composites

Experimental and statistical study on the effect of process parameters on the quality of continuous fiber composites made via additive manufacturing

Effects of defects on laminate quality and mechanical performance in thermoplastic Automated Fiber Placement-based process chains

Experimental and numerical study of thermoforming of Al/CFRP hybrid composites

The Effect of Surface Substrate Treatments on the Bonding Strength of Aluminium Inserts with Glass-Reinforced Poly(phenylene) Sulphide

Thermochemical and Mechanical Aspects of Composite Tape Laying

A Modeling Framework for the Thermoforming of Carbon Fiber Reinforced Thermoplastic Composites

An experimental validation study of a numerical modeling approach to predicting post-consolidation dimensions of thermoplastic composites

Top-hat crashboxes of thermoplastic fibre-metal-laminates processed in one-step thermoforming: Experimental and numerical study

Numerical Modelling of the Thermoforming Behaviour of Thermoplastic Honeycomb Composite Sandwich Laminates

Investigation of thermoforming processes of aerostructures: Simulation and microstructural analysis

Corrugated composites: production-integrated quality assurance in carbon fiber reinforced thermoplastic sine wave beam production

Foundational Investigation on the Characterization of Porosity and Fiber Orientation Using XCT in Large-Scale Extrusion Additive Manufacturing

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Atomistic Modeling of the Effect of Temperature on Interfacial Properties of 3D-Printed Continuous Carbon Fiber-Reinforced Polyamide 6 Composite: From Processing to Loading

Influence of Aluminum Surface Treatment on Tensile and Fatigue Behavior of Thermoplastic-Based Hybrid Laminates

Laser-assisted automated tape laying: Effects of placement rate and heated tooling on layer bonding and tensile properties

Surface topology modification using 3D printing techniques to enhance the interfacial bonding strength between polymer substrates and prepreg carbon fibre-reinforced polymers

Characterization Approach for Compression Molded Discontinuous Fiber Thermoplastic Composites