Abstract:This study deals with the Nb–niobium silicide-based composites developed by the hot-pressing of Nb–Si–Ti ternary powder mixtures with a fixed Ti addition (6at.%) and Si content ranging from hypereutectic (11at.%) to near-eutectic compositions (18at.%). The effects of Si content, Ti addition and strain rates on the sample microstructural characterization, flexural strength, fracture toughness, quasi-static compressive deformation and failure processes were investigated. It was revealed that the volume fraction of silicides increased with increasing Si content, and most of the Ti atoms dissolved into the niobium silicides to form (Nb,Ti)5Si3 solid solutions instead of binary titanium silicides. The experimental evidence showed that a moderate improvement in the flexural strength, fracture toughness and compressive yield stress of the composites was achieved by the addition of Ti. Higher Si additions produced a much more remarkable enhancement in the compressive yield stress and bulk hardness, whereas both the flexural strength and fracture toughness decreased with increasing Si content owing to the existence of residual porosities in the samples. The composites showed remarkable superiority to the arc-melted Nb–Si alloys and monolithic niobium silicides in fracture toughness (8.3–13.0MPam vs. 4.5MPam), where the toughening effect was attributed mainly to crack bridging and crack deflection by the remaining ductile Nb phase. Moreover, quasi-static uniaxial compression tests at strain rates between 10–5 and 10–3s−1 indicated that the deformation behavior and failure processes were significantly affected by Si content and strain rates. The strain-rate-hardening behavior for all the strain rates was observed in the composite materials and the strain-rate sensitivity decreased with increasing Si content. At a lower strain rate, the composite materials with a hypoeutectic Si composition failed with a pseudoplastic response and at an angle of ∼45° off the compressive loading direction. However, in the case of higher strain rate and Si content, the brittle failure in the samples occurred through vertical splitting and spalling of fragments.

Fracture of Laminated and In Situ Niobium Silicide-Niobium Composites

Mechanism of Interstitial Atoms on Oxidation and Fracture of Niobium-Silicon Alloys

Microstructural and mechanical characterization of Nb-based in situ composites from Nb–Si–Ti ternary system

Mechanism of Solute Hardening and Dislocation Debris-Mediated Ductilization in Nb-Si Alloy

Behaviors and interactions of strengthening and constraint for ductile Nbss matrix in Nb–Si based alloys

Influence of Metallic Properties on the Fracture Characteristics of Al2O3/Ti/Ni‐laminated Composites

The balance of mechanical and environmental properties of a multielement niobium-niobium silicide-basedIn Situ composite

Characterization of the Interfacial Structure and Fracture Behavior of in Situ Synthesized Ceramics to Reinforce Ni-based Composite Coatings

Nanoscale ductile fracture and associated atomistic mechanisms in a body-centered cubic refractory metal

Mo effect on the phase stability and room-temperature fracture toughness of Nb/Nb5Si3 in-situ composites

Creep Mechanisms in High-Temperature In-Situ Composites

Atomic models of the structure of niobium silicides in Nb–Si in situ composites

Micromechanisms of Deformation and Fracture in Rapidly Solidified Ni3al Alloys

Fracture Mechanism of 316L/bni-2 Brazed Joints Using Experiment and Microstructure-Based Model

Tensile deformation and fracture mechanisms of Cu/Nb nanolaminates studied by in situ TEM mechanical tests

Fracture Mechanism of Metallic Film with Nano to Sub-Micron Thickness on Polycrystalline Substrate

Effect of Mo Addition on Microstructure and Properties of Nb/Nb<sub>5</sub>Si<sub>3</sub> In-Situ Composite

Study on the Fracture Toughness of Nb-10Si Alloys

Micromechanism in fracture toughness of NbCr2 laves phase improved by nickel alloying: first-principles calculation

Enhanced strain delocalization through formation of dispersive micro shear bands in laminated Ni

Fracture Behavior and Mechanism of Nb-Si-Based Alloys with Heterogeneous Layered Structure