Micromechanism in fracture toughness of NbCr2 laves phase improved by nickel alloying: first-principles calculation

Haitang Huang,Guifa Li,Xuan Xiao,Shiqiang Lu,Ping Peng

DOI: https://doi.org/10.1016/j.jallcom.2020.158040

IF: 6.2

2021-03-01

Journal of Alloys and Compounds

Abstract:<p>Based on the first-principle calculation, the micromechanism in fracture toughness of the NbCr₂ Laves phase improved by Nickel alloying was estimated by several parameters such as binding energy, fracture toughness, electronic structure, et al. The results of formation enthalpy and binding energy show that the Nb₈Cr_16−xNi_x phase can be formed stably. However, when the Ni content is only 4.17 at% (Nb₈Cr₁₅Ni), its fracture toughness value <em>K</em>_IC in (100), (110) and (111) directions can be only improved obviously. Mulliken population analysis shows that the <em>R</em>_LBOP (ratio of local bond overlap population) values of Nb₈Cr₁₅Ni phase in three main Miller index directions are much closer to 1 than that of the NbCr₂ Laves phase, which means the mechanical performance of Nb₈Cr₁₅Ni exhibits much better toughness. The electronic structure shows its optimal fracture toughness mainly comes from the strengthening of metal bonds and the weakening of covalent bonds in the direction of (110) Miller index. Thus our findings open a potential avenue for the comprehensive study of NbCr₂ Laves materials.</p>

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to improve the fracture toughness of NbCr₂ Laves phase through nickel alloying. Specifically, the researchers hope to increase the fracture toughness of NbCr₂ materials at room temperature through nickel alloying to overcome their brittleness problem.

### Research Background and Problem Description

The NbCr₂ alloy has a C15 Laves - phase structure. Due to its high melting point, low density, good high - temperature creep resistance and thermal corrosion resistance, it is regarded as an important high - temperature structural material. However, experimental studies have shown that the fracture toughness value of NbCr₂ at room temperature is only 1.0 - 1.5 MPa·m^(1/2), showing obvious brittleness. Therefore, how to improve the fracture toughness of NbCr₂ at room temperature has become an important research topic in this field.

### Research Objectives

This paper aims to study the influence of nickel alloying on the microscopic mechanism of NbCr₂ Laves phase, especially on its fracture toughness, through first - principles calculation. Specific objectives include:

1. **Evaluate the formation enthalpy and binding energy**: By calculating the formation enthalpy and binding energy at different Ni contents, determine the optimal occupancy of Ni atoms in the NbCr₂ lattice.
2. **Analyze the elastic constants**: Study the influence of Ni alloying on the elastic constants of NbCr₂, and then evaluate its mechanical stability.
3. **Calculate the fracture toughness**: Based on the surface energy and Young's modulus, calculate the fracture toughness of NbCr₂ at different Ni contents and evaluate its improvement effect.
4. **Electron structure analysis**: Through Mulliken population analysis and electron structure calculation, reveal the microscopic mechanism of the influence of Ni alloying on the fracture toughness of NbCr₂.

### Main Findings

- **Formation enthalpy and binding energy**: The calculation results show that as the Ni content increases, both the formation enthalpy and binding energy of NbCr₂ change, indicating that Ni alloying can change the structural stability of NbCr₂.
- **Elastic constants**: Ni alloying significantly changes the elastic constants of NbCr₂, especially C11, C12 and C44, indicating that its mechanical properties have been improved.
- **Fracture toughness**: When the Ni content is 4.17 at%, the fracture toughness of NbCr₂ in the (100), (110) and (111) directions is significantly improved. Especially in the (111) direction, the fracture toughness is increased from 1.66 MPa·m^(1/2) to 1.74 MPa·m^(1/2).
- **Electron structure**: Mulliken population analysis shows that Ni alloying enhances the metallic bond and weakens the covalent bond, especially in the (110) direction, which helps to improve the fracture toughness.

In summary, this study reveals the microscopic mechanism of the influence of nickel alloying on the fracture toughness of NbCr₂ Laves phase through theoretical calculation, providing a theoretical basis for the development of high - performance NbCr₂ materials.