Abstract:High-performance (Ti, Nb)B/Ti2AlNb composites are promising high-temperature structural materials for the new generation of aerospace engines. The interfaces between the (Ti, Nb)B reinforcement and matrix phases (i.e. O-Ti2AlNb, α2-Ti3Al and B2 phases) affect the mechanical properties of the composites largely. In this study, the properties of the interfaces were systematically revealed after fabricating a (Ti, Nb)B/Ti2AlNb composite by low-energy ball-milling and spark plasma sintering (SPS). A high-resolution transmission electron microscopy (HRTEM) was adopted to evaluate the crystallographic orientation relationships (ORs) and interfacial structures. (Ti, Nb)B maintains three coherent interfaces with the matrix, and the preferred ORs between them can be expressed as [1 1 <math>2¯</math> 0]α2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 0 0)α2//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 0]O//[0 1 0](Ti, Nb)B and (1 1 0)O//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 1]B2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 2)B2//(1 0 0)(Ti, Nb)B. The results of first-principles calculations indicated that the (<math>1¯</math> 1 0 0)α2/(1 0 0)(Ti, Nb)B interface possesses a higher bonding strength compared with the (1 1 0)O/(1 0 0)(Ti, Nb)B and (<math>1¯</math> 1 2)B2/(1 0 0)(Ti, Nb)B interfaces, and the (Ti, Nb)B reinforcement and the matrix are bonded through strong ionic bonds and weak covalent bonds. Moreover, based on Bramfitt's lattice mismatch theory, it was found that the (Ti, Nb)B reinforcement acts as an effective substrate in promoting the heterogeneous nucleation and preferred precipitation of the α2 phase. Suppressing the brittle α2 precipitate around the reinforcement improves the ductility of the composite obviously.

Behaviors and interactions of strengthening and constraint for ductile Nbss matrix in Nb–Si based alloys

Microstructure‐Property Relations in the Tensile Behavior of Bimodal Nanostructured Metals

Microstructural and mechanical characterization of Nb-based in situ composites from Nb–Si–Ti ternary system

MICROSTRUCTURAL CHARACTERISTICS AND MECHANICAL PROPERTIES OF A Nb/Nb5Si3 BASED COMPOSITE WITH AND WITHOUT DIRECTIONAL SOLIDIFICATION

Balancing the fracture toughness and tensile strength by multiple additions of Zr and Y in Nb–Si based alloys

Outstanding strength and toughness in graphene reinforced Nb/Nb5Si3 composites with interfacial nano-phases

Effects of the microstructure and minor elements on the fracture toughness of Nb-Si alloy

Fracture Behavior and Mechanism of Nb-Si-Based Alloys with Heterogeneous Layered Structure

Crystallographic orientation relationships and interfacial structures between reinforcement and matrix phases in an in situ (Ti, Nb)B/Ti2AlNb composite

Microstructure and mechanical properties of Nb 16Si alloys with Zr additions

Investigation of mechanical properties of NbC particle-reinforced iron matrix composites under tensile loading- A numerical simulation study

Microstructures and mechanical properties of in-situ FeCrNiCu high entropy alloy matrix composites reinforced with NbC particles

Fracture of Laminated and In Situ Niobium Silicide-Niobium Composites

Mechanical properties of Al-Si matrix composites synergistically reinforced by high-entropy alloy and SiC nanoparticles

A Study of the Effects of Hf and Sn on the Microstructure, Hardness and Oxidation of Nb-18Si Silicide-Based Alloys-RM(Nb)ICs with Ti Addition and Comparison with Refractory Complex Concentrated Alloys (RCCAs)

Effect of Volume Fraction of Reinforcement on Microstructure and Mechanical Properties of In Situ (Ti, Nb)B/Ti2AlNb Composites with Tailored Three-Dimensional Network Architecture

Achieving an appropriate strength-ductility synergy of Nbss/Nb5Si3 in situ composites governed by gradient annealing heat treatment

The Potential Significance of Microalloying with Niobium in Governing Very High Cycle Fatigue Behavior of Bainite/martensite Multiphase Steels

Investigation on the Role of Nb in Strengthening Ti3SiC2/Ti25Zr25Ni25Cu2 5 +nb/ti60 Brazed Joint

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Study on microstructure and bending properties of NbC/Fe cluster-reinforced steel-based laminated composite