Abstract:Bottom-blowing O2-CaO steelmaking technology has numerous advantages such as low iron and steel consumptions, low dust emissions, and molten steel cleanliness. Responsive to a weak stirring and high iron oxide slag in a 120-ton conventional "combined blowing" converter in a factory, a cold model of bottom-blowing O2-CaO was designed. Bottom-blowing and top-blowing parameters on the mixing effect of bottom-blowing O2-CaO converter were studied. Two symmetrical points on 0.4R trunnion connection of the bottom-blowing converter were sought as the optimum hole location. The total flow rate of bottom–blowing and top-blowing was 8.2 and 75 Nm3/h, respectively. The optimum top-blowing position was 400 mm and the optimum solid–gas ratio was found to be 9.0. The optimum scheme under laboratory conditions was converted and applied to a 120-ton bottom-blown O2-CaO converter; subsequently, hundred industrial tests were performed. The stirring strength of the molten bath was enhanced remarkably and the metallurgical effect was improved remarkably. Carbon and oxygen product of the end-point molten steel was reduced by 5.87 × 10−4 while the iron oxide content in the final slag was reduced by 1.99 pct. This laid a foundation for industrial applications of the bottom-blown O2-CaO converter steelmaking technology.

Research on Top and Bottom Mixed Blowing CO2 in Converter Steelmaking Process

Influence of Bottom Blowing Oxygen on Dust Emission in Converter Steelmaking

Physical Simulation and Industrial Testing of Bottom-Blown O2-CaO Converter for Steelmaking Process

Effect of CO<Subscript>2</Subscript> Mix Ratios on Materials and Heat Balances of Bottom-Blowing O<Subscript>2</Subscript>–CaO Converter

Influence of bottom-blowing gas species on the nitrogen content in molten steel during the EAF steelmaking process

Recent Advancements in Source Reduction and Recycling Technologies for Converter Dust

Study on Metallurgical Characteristics of the Bottom-Blown O2–CaO Converter

A review of carbon dioxide disposal technology in the converter steelmaking process

Oxidizing Decarbonization Characteristics of MgO–C Refractories for Electric Arc Furnace Steelmaking with CO2 Utilization

Optimization Dephosphorization Process of the Early Stage in 300t Steelmaking Converter with Top and Bottom Combined Blowing

Technology of converter blowing and using limestone for slagging

Numerical Simulation of CO2 Used for Slag Splashing Process in Converter

Method for producing high-carbon steel by applying high-carbon-catch single-slag method through 50t top blast converter

Effect Of Co2 On Vanadium Extraction And Thermal Effect In Top-Bottom Combined Blowing Converter

Simulation of Fluid Flow in the Top–Bottom Combined Blowing Converter

Numerical Simulation of Multiphase Flow Induced by Bottom Blowing Limestone Powder in Converter Steelmaking

Application of submerged gas-powder injection technology to steelmaking and ladle refining processes

Experimental Characterization of CO2 and CaCO3 Used in a Pyrometallurgical Vanadium-Extraction Process

Theoretical Analysis and Experimental Study of the Application of CO2 in the Smelting of 410S Stainless Steel

Influence of Carrier Gas of Converter Oxygen Lance on Smooth Distribution of O2−CO2−CaO Mixed Jet

Mathematical Modeling and Analyses of Integrated Process with Blast Furnace Iron Making and Co-gasification of Coal-COG-BF top gas