Abstract:After the converter steelmaking process, a considerable number of ferroalloys are needed to remove dissolved oxygen from the molten steel, but it also forms a lot of oxide inclusions that cannot be completely removed. At the same time, it increases the carbon emissions in the steel production process. After years of research, our team have developed a series of clean deoxidation technologies, including carbon deoxidation, hydrogen deoxidation, and waste plastic deoxidation of molten steel to address the aforementioned issues. In this study, thermodynamic calculations and laboratory experiments were employed to verify that carbon and hydrogen can reduce the total oxygen content in the molten steel melt to below 5 × 10 −6 and 10 × 10 −6 , respectively. An analysis of the deoxidation mechanisms and effects of polyethylene and polypropylene was also conducted. In addition, the applications of carbon deoxidation technology in different steels with the hot-state experiment and industrial production were discussed carefully. The carbon deoxidation experimental results of different steels were as follows: (1) the oxygen content of bearing steel was effectively controlled at 6.3 × 10 −6 and the inclusion number density was lowered by 74.73% compared to aluminum deoxidized bearing steel; (2) the oxygen content in gear steel was reduced to 7.7 × 10 −6 and a 54.49% reduction of inclusion number density was achieved with almost no inclusions larger than 5 μm from the average level of industry gear steels; (3) a total oxygen content of M2 high-speed steel was as low as 3.7 × 10 −6 . In industrial production practice, carbon deoxidation technique was applied in the final deoxidation stage for non-aluminum deoxidized bearing steel, and it yielded excellent results that the oxygen content was reduced to below 8 × 10 −6 and the oxide inclusions in the steel mainly consist of silicates, along with small amounts of spinel and calcium aluminate.

Experimental Study on Decarburization and Chromium Retention in Stainless Steel Smelting with CO2 as Alternative to N2

Experimental Study on Decarburization and Chromium Retention in Stainless Steel Smelting with CO2 as Alternative to N-2

Experimental Study on Decarburization and Chromium Retention in Stainless Steel Smelting with CO <sub>2</sub> as Alternative to N <sub>2</sub>

Theoretical Analysis and Experimental Study of the Application of CO2 in the Smelting of 410S Stainless Steel

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Experimental Study on Decarburization of Stainless Steel under Electromagnetic Levitation

Process Model for Manufacturing 400 Series Stainless Steel with Purified CO2 As an Auxiliary Oxidant and Realizing Carbon Cycle

Mathematical Simulation of Decarburization with CO2 Injection During RH Refining of Ultra-Low-Carbon Steel

CO2 Effective Conversion in Fe-C-Al-Si Molten Steel under Vacuum Conditions

Levitation refining of stainless steel by using Ar-CO2 gas mixture

Oxidizing Decarbonization Characteristics of MgO–C Refractories for Electric Arc Furnace Steelmaking with CO2 Utilization

New steelmaking process based on clean deoxidation technology

Enhanced carbon dioxide sequestration and Cr detoxification: Direct carbonation of AOD slag with additives under ambient conditions

Effects of CO 2 reaction-induced bubble proliferation on the dynamic conditions of stainless steel smelting molten pool

Experimental Characterization of CO2 and CaCO3 Used in a Pyrometallurgical Vanadium-Extraction Process

Oxide Scale Formation on Low-Carbon Steels in Future Reheating Conditions

Research on Top and Bottom Mixed Blowing CO2 in Converter Steelmaking Process

Effect of Supercritical CO2 on Steel Ductility at 450°-650°C

A review of carbon dioxide disposal technology in the converter steelmaking process

Atomic Insights into the Corrosion Behavior of Fe-Cr Alloys in Supercritical CO2 Environment

Carbonation of Argon Oxygen Decarburization Stainless Steel Slag and Its Effect on Chromium Leachability