Abstract:Highlights • scCO 2 foaming and melt-extrusion were used to produce reinforced scaffolds. • Creation of foams with high-porosity, homogeneity and reinforcement. • Pressure had a significant influence on pore size and compressive strength. • Stresses similar to trabecular bone were obtained for Mg(OH) 2 and HAp foams. Background As an alternative to conventional medicine, scaffolds have emerged to mimic and/or replace damaged tissue. 3D porous matrix scaffolds made of biodegradable and biocompatible polymers, including PLGA, have proven to be of particular interest for use as bone substitutes in Tissue Engineering. Methods The study used high-pressure CO 2 foaming to produce PLGA-based foams. Previously, melt-extrusion was used to introduce reinforcement agents, Mg(OH) 2 , Hydroxyapatite (HAp) and Mg, to achieve foams with improved properties. Foam morphology was analysed using SEM, EDS, and 3D scanner techniques, and foam strength was measured using compression tests. A statistical analysis was carried out to study the effect of pressure and temperature on foams pore size and hardness. Significant findings The foams produced were rigid, non-sticky and time-stable, and showed high porosity. The pressure was found to be the only significant variable to tune both porosity and cell densities of scaffolds. Setting a pore size at 500 μm, compressive stresses of 1.85 MPa, 3.81 MPa were achieved for Mg(OH) 2 and HAp, respectively. Those results were comparable to literature ́s trabecular bovine bone compression resistance of 4.2 MPa. This finding indicated the possibility of getting, at the same time, convenient results for porosity and mechanical resistance for their use as bone replacement agents. Finally, a 20 % w/w ratio of reinforcing agent was found to produce the best pore size-stress ratio. Graphical abstract Download : Download high-res image (182KB) Download : Download full-size image

Foaming of PCL-Based Composites Using scCO2: Structure and Physical Properties

Foaming of PCL-Based Composites Using scCO2—Biocompatibility and Evaluation for Biomedical Applications

Generation of Biocompatible PCL Foams by Supercritical Foaming

Fabrication Of Pcl Scaffolds By Supercritical Co2 Foaming Based On The Combined Effects Of Rheological And Crystallization Properties

Technical development and application of supercritical CO2 foaming technology in PCL foam production

Effects of Processing Parameters and Thermal History on Microcellular Foaming Behaviors of PEEK Using Supercritical CO2

Preparation of PLGA/β-TCP Composite Scaffolds with Supercritical CO2 Foaming Technique

Novel Fabricating Process for Porous Polyglycolic Acid Scaffolds by Melt-Foaming Using Supercritical Carbon Dioxide

Fabrication of well-controlled porous foams of graphene oxide modified poly(propylene-carbonate) using supercritical carbon dioxide and its potential tissue engineering applications

Study on Microcellular Foaming of Poly(phenylene sulifde)/Poly(ether ether ketone) Blends Using Supercritical Carbon Dioxide

Microcellular foaming of polylactide and poly(butylene adipate-co-terphathalate) blends and their CaCO3 reinforced nanocomposites using supercritical carbon dioxide

Fabrication of Highly Interconnected Poly(ε-caprolactone)/cellulose Nanofiber Composite Foams by Microcellular Foaming and Leaching Processes

Foaming Behavior of the Fluorinated Ethylene Propylene Copolymer Assisted with Supercritical Carbon Dioxide

Microcellular Foams of Glass-Fiber Reinforced Poly(phenylene Sulfide) Composites Generated Using Supercritical Carbon Dioxide

Utilization of CO2 As a Physical Blowing Agent for Foaming of High Temperature Sulfone Polymers

Enhancing polymeric bone scaffolds mechanical characteristics using supercritical CO 2 foaming and reinforcing agents

Foaming of 3D-Printed PLA/CaCO3 Composites by Supercritical CO2 Process for Sustainable Food Contact Materials

Design and synthesis of novel polycaprolactone-chitosan based scaffolds using supercritical carbon dioxide

Preparation of short carbon fiber/polypropylene fine-celled foams in supercritical CO2

Polymer Supercritical CO2 Foaming under Peculiar Conditions: Laser and Ultrasound Implementation

Preparation of Poly(propylene Carbonate)/nano Calcium Carbonate Composites and Their Supercritical Carbon Dioxide Foaming Behavior