Abstract:The renewability and ease of processing of polylactide (PLA) make it ideal for disposable foam products. However, controlling the foam structure is challenging due to its low melt strength and crystallization ability, which can result in cell rupture-prone and excessively large cells, necessitating a comprehensive understanding of the influences of foaming parameters (temperature, pressure, and time) on cell structures and properties to unlock PLA’s full potential. This study optimizes the fabrication of PLA foams using solid-state batch foaming under supercritical CO2 conditions by employing a central composite design of response surface methodology. Single-parameter investigations reveal that higher foaming temperature, increased pressure, and longer foaming time increase the apparent density due to reduced polymer viscosity, pressure-dependent gas entrapment, and enhanced gas diffusion, leading to faster cell nucleation and cell formation. The compressive properties depend on stress-strain behavior and cell morphology, influenced by the cell shape and wall thickness. Thicker cell walls delay cell buckling and improve compression resistance. Higher sphericality evenly distributes compressive stress across cell surfaces, enhancing the foam’s resilience against localized collapse. Multi-response optimization successfully fabricated lightweight PLA foam (0.134 g/cc apparent density) with enhanced compressive modulus (1.955 MPa at 50% strain) and controlled cell morphology (average cell size of 21.055 μm and cell density of 52.385 × 105 cells/cm3) at optimized foaming conditions (180 °C, 165 bar, and 2.3 h). The PLA foams have potential as a reusable and degradable absorbent for liquids and oils, but there are challenges in scaling production.

Process-structure Relationships in PCL Foaming

Static and Dynamic Behavior of PU Foams with Multilayer Coatings

Generation of Biocompatible PCL Foams by Supercritical Foaming

Foaming of PCL-Based Composites Using scCO2: Structure and Physical Properties

Modeling and Experimental Validation of Cell Morphology in Microcellular-Foamed Polycaprolactone

Microcellular Injection Molded Polylactic Acid/poly (Ε-Caprolactone) Blends with Supercritical CO2: Correlation Between Rheological Properties and Their Foaming Behavior

Technical development and application of supercritical CO2 foaming technology in PCL foam production

Effects of Injection Molding Process Parameters on the Chemical Foaming Behavior of Polypropylene and Polystyrene

Polymer Supercritical CO2 Foaming under Peculiar Conditions: Laser and Ultrasound Implementation

Numerical simulation of polypropylene foaming process assisted by carbon dioxide: Bubble growth dynamics and stability

Foaming Cyclo-Olefin Copolymers with Carbon Dioxide

Multi-Response Optimization and Cell Structure-Property Relationships of Polylactide (PLA) Foams

Fabrication of Highly Interconnected Poly(ε-caprolactone)/cellulose Nanofiber Composite Foams by Microcellular Foaming and Leaching Processes

Influence of Molecular Structure on the Rheological Properties and Foamability of Long Chain Branched Polypropylene by “One-Pot” Reactive Extrusion

TPV Foaming by CO2 Extrusion: Processing and Modelling

Controlled Foaming of Polycarbonate/polymethyl Methacrylate Thin Film with Supercritical Carbon Dioxide

Foaming of PCL-Based Composites Using scCO2—Biocompatibility and Evaluation for Biomedical Applications

Rheological Properties of Thermoplastic Polymers with Dissolved Gases for Foaming Applications

Solubility and diffusivity of supercritical CO2 for polycaprolactone in its molten state: Measurement and modeling using PC-SAFT and free volume theory

Tuning High and Low Temperature Foaming Behavior of Linear and Long-Chain Branched Polypropylene via Partial and Complete Melting

Extrusion Foaming of Poly (lactic acid)/Soy Protein Concentrate Blends