Abstract:Polymer nanocomposite foams have received considerable attention because of their potential use in advanced applications such as bone scaffolds, food packaging, and transportation materials due to their low density and enhanced mechanical, thermal, and electrical properties compared to traditional polymer foams. In this study, silica nanofillers were used as nucleating agents and supercritical carbon dioxide as the foaming agent. The use of nanofillers provides an interface upon which CO 2 nucleates and leads to remarkably low average cell sizes while improving cell density (number of cells per unit volume). In this study, the effect of concentration, the extent of surface modification of silica nanofillers with CO 2 -philic chemical groups, and supercritical carbon dioxide process conditions on the foam morphology of poly(methyl methacrylate), PMMA, were systematically investigated to shed light on the relative importance of material and process parameters. The silica nanoparticles were chemically modified with tridecafluoro-1,1,2,2-tetrahydrooctyl triethoxysilane leading to three different surface chemistries. The silica concentration was varied from 0.85 to 3.2% (by weight). The supercritical CO 2 foaming was performed at four different temperatures (40, 65, 75, and 85°C) and between 8.97 and 17.93 MPa. By altering the surface chemistry of the silica nanofiller and manipulating the process conditions, the average cell diameter was decreased from 9.62 ± 5.22 to 1.06 ± 0.32 μ m, whereas, the cell density was increased from 7.5 ± 0.5 × 10 8 to 4.8 ± 0.3 × 10 11 cells/cm 3 . Our findings indicate that surface modification of silica nanoparticles with CO 2 -philic surfactants has the strongest effect on foam morphology.

Controlled Foaming of Polycarbonate/polymethyl Methacrylate Thin Film with Supercritical Carbon Dioxide

Preparation and Density Control of Pmma Microcellular Foams Via Supercritical Carbon Dioxide Foaming

Study on the Foaming Behaviors of PBS and its Modification with PA6IcoT Assisted by scCO2

In Situ Polymerization of Poly(methyl Methacrylate)/clay Nanocomposites in Supercritical Carbon Dioxide

Numerical simulation of polymethyl‐methacrylate supercritical fluid foaming process: Bubble growth dynamics

Controlling cellular morphology by supercritical carbon dioxide

Controlling Foam Morphology of Poly(methyl methacrylate) via Surface Chemistry and Concentration of Silica Nanoparticles and Supercritical Carbon Dioxide Process Parameters

Foaming Behavior of the Fluorinated Ethylene Propylene Copolymer Assisted with Supercritical Carbon Dioxide

Batch foaming of ultra-high molecular weight polyethylene with supercritical carbon dioxide: Influence of temperature and pressure

Ultrasound and H2O assisted scCO2 foaming technology for preparation of PS/PMMA composite foams with ultra-lightweight and super thermal-insulation

Effect of the Supercritical CO2 on Surface Structure of PMMA/PS Blend Thin Films

Fluorescence Assisted Visualization and Destruction of Particles Embedded Thin Cell Walls in Polymeric Foams Via Supercritical Foaming

High-Quality Foaming and Weight Reduction in Microcellular-Injection-Molded Polycarbonate Using Supercritical Fluid Carbon Dioxide under Gas Counter Pressure

Study on Extrusion Foaming of Polypropylene with Supercritical CO2 As Foaming Agent

Polymer Supercritical CO2 Foaming under Peculiar Conditions: Laser and Ultrasound Implementation

Study on Foaming Properties of PLA/NCC Microcellular Foam Materials

Effect of Plasticizer on the Morphology and Foaming Properties of Poly(vinyl alcohol) Foams by Supercritical CO2 Foaming Agents

Enhanced Crystallization of Bisphenol A Polycarbonate in Thin and Ultrathin Films by Supercritical Carbon Dioxide

Foaming of PCL-Based Composites Using scCO2: Structure and Physical Properties

Microcellular Injection Molded Polylactic Acid/poly (Ε-Caprolactone) Blends with Supercritical CO2: Correlation Between Rheological Properties and Their Foaming Behavior

Preparation and Supercritical CO2 Foaming of Modified Nanocrystalline Cellulose Reinforced Polylactic Acid Bionanocomposites