Abstract:This paper reports on a novel process for preparing open-cell polymer foams which consists in (1) blending a desired polymer with one which is much more CO2-philic and which is the dispersed phase, (2) tuning the sea-island type of morphology of the polymer blend to a co-continuous type by selectively swelling the CO2-philic polymer with CO2 saturation, and (3) selectively foaming the CO2-philic polymer by CO2 depressurization. More specifically, a blend composed of 70% of isotactic polypropylene (PP) and 30% of a copolymer of ethylene-propylene-diene monomer (EPDM) is chosen to show the working principle and potential of the above process. PP is a desired polymer and EPDM a CO2-philic one. During the CO2 saturation, the initially sea-island type of morphology of the PP/EPDM (70/30) blend evolves into a more or less co-continuous one due to the much more CO2-philic nature of the EPDM. Upon CO2 depressurization, foaming takes place primarily in the EPDM phase, leading to open cells. To achieve open-cells for the PP/EPDM (70/30) blend, it is necessary to search for an optimum CO2 saturation pressure and temperature window. Within this window, the cell size and the expansion ratio are in the range of 1.5-17.5 mu m and 1.5-6.6, respectively. Tensile results show that the elongation at break of the CO2 saturated and foamed PP/EPDM blends is higher than that of the un-treated one, indicating that the co-continuous morphology of the PP/EPDM blend improves its toughness. Moreover, compression results indicate that the open-cell foams exhibit good flexibility and elasticity. (C) 2016 Elsevier Ltd. All rights reserved.

Solid-State Foaming of Cyclic Olefin Copolymer by Carbon Dioxide

Application of a CO2 Pressure Swing Saturation Strategy in PP Semi-Solid-State Batch Foaming: Evaluation of Foamability by Experiments and Numerical Simulations

Foaming Cyclo-Olefin Copolymers with Carbon Dioxide

Polymer Supercritical CO2 Foaming under Peculiar Conditions: Laser and Ultrasound Implementation

Solid state foaming of poly(ethylene terephthalate) based on periodical CO2-renewing sorption process

Foaming of Polypropylene with Supercritical Carbon Dioxide

Manipulation of Polymer Foam Structure Based on Co2-Induced Changes in Polymer Fundamental Properties

Supercritical carbon dioxide induced foaming of highly oriented isotactic polypropylene

Foaming of PCL-Based Composites Using scCO2: Structure and Physical Properties

Microcellular Foaming of Polysulfones in Supercritical CO2 and the Effect of Co-Blowing Agent

Controlling cellular morphology by supercritical carbon dioxide

Preparation of Open-Cell Polymer Foams by CO2 Assisted Foaming of Polymer Blends

Solid‐state Microcellular High Temperature Vulcanized (HTV) Silicone Rubber Foam with Carbon Dioxide

Physical Properties of Microcellular Polymeric Foams with Supercritical CO2

Foaming Behavior of the Fluorinated Ethylene Propylene Copolymer Assisted with Supercritical Carbon Dioxide

Insight into the Influence of Properties of Poly(Ethylene-co-octene) with Different Chain Structures on Their Cell Morphology and Dimensional Stability Foamed by Supercritical CO2

Effects of Crystal Structure on the Foaming of Isotactic Polypropylene Using Supercritical Carbon Dioxide As a Foaming Agent

Batch foaming of ultra-high molecular weight polyethylene with supercritical carbon dioxide: Influence of temperature and pressure

Controlled Foaming of Polycarbonate/polymethyl Methacrylate Thin Film with Supercritical Carbon Dioxide

Cell Characteristics of Epoxy Resin Foamed by Step Temperature-Rising Process Using Supercritical Carbon Dioxide As Blowing Agent

Foaming of Low Density Polyethylene with Carbon Dioxide Based on Its in Situ Crystallization Behavior Characterized by High-Pressure Rheometer