Abstract:High-chromium vanadium–titanium magnetite (HVTM) is an exceptional iron source that has not been mined on a large scale. Since using flux pellets facilitates the reduction in emissions and consumption, a reasonable way to utilize HVTM is by smelting it into flux pellets in a blast furnace. This study elucidates the reducibility and reaction mechanism of HVTM flux pellets. The reducibility, phase composition, and morphology were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy spectroscopy analysis (EDS). The influence of basicity on the reduction reaction mechanism was also analyzed, and 30 pct of conventional iron concentrate was added to optimize the reduction performance of pure HVTM flux pellets. The pellets were treated at 900 °C for 180 minutes in a reducing atmosphere of 30 pct CO+70 pct N 2 . When the basicity (CaO/SiO 2 ) increased from 0.2 to 1.8, the reduction degree of pure HVTM pellets (100 pct HVTM pellets) increased from 60.3 to 85.3 pct. Meanwhile, the reduction degree of HVTM pellets comprising 30 pct conventional iron concentrate (70 pct HVTM pellets) increased from 63.1 to 89.5 pct. The post-reduction compressive strength of 100 pct HVTM pellets decreased from 965.8 to 223.8 N; the post-reduction compressive strength of 70 pct HVTM pellets first decreased from 1454.6 to 223.0 N and then increased to 630.9 N. Moreover, 70 pct HVTM pellets exhibited better reducibility and higher post-reduction compressive strength and could meet the blast furnace standards when the basicity exceeded 1.6 owing to the low TiO 2 content and an appropriate amount of liquid phase. The reaction mechanism of 100 pct HVTM pellets was first controlled by the random nucleation and subsequent growth model as well as the two-dimensional diffusion model. However, after increasing the basicity, the reaction mechanism was only characterized by the random nucleation and subsequent growth model.

Optimization of Main Factors for Decarbonizing Ratio of TiB2 Powders by Reverse Flotation Using Response Surface Methodology

Fundamental Study on Utilization of Titanium Resources by RHF Process

The Separation Behavior of TiB2 during Cl2-Free Degassing Treatment of 5083 Aluminum Melt

Optimization of Flotation Conditions for Long-Flame Coal Mud by Response Surface Method

Interface behavior and oxidation consolidation mechanism of titanium-bearing iron sand particles with ball-milling pretreatment

Sticking Behavior of Pellets During Direct Reduction Based on Hydrogen Metallurgy: An Optimization Approach Using Response Surface Methodology

Optimization Studies on Biological Desulfurization of Sulfide Ore Using Response Surface Methodology

Optimization of response surface methodology (RSM) for defluorination of spent carbon cathode (SCC) in fire-roasting aluminum electrolysis

Research on grinding and flotation decarbonization of coal gasification fine slag

Effects of Embedding Direct Reduction Followed by Magnetic Separation on Recovering Titanium and Iron of Beach Titanomagnetite Concentrate

Modeling and optimizing the flotation of coal fines: an investigation utilizing the Box-Behnken design in conjunction with response surface methodology

A novel approach for the resource utilization of zinc-bearing dust and sludge via the blast furnace main trough

Reducibility Optimization and Reaction Mechanism of High-Chromium Vanadium–Titanium Magnetite Flux Pellets

Parameter optimization of high energy ball milling process for TiO2 powder using the Taguchi method

Influencing Factors Optimization on the CompressiVe Strength of High Iron Bauxite Hot Briquettes with Response Surface Methodology

Industrial Experiment of Technique Optimization on IF Steel in RH Degasser

Optimize the Preparation of Novel Pyrite Tailings Based Non-sintered Ceramsite by Plackett-Burman Design Combined With Response Surface Method for Phosphorus Removal

Improving the Flotation Performance of Coking Coal Using the Reverse-Direct Flotation Process

A Superior Technology for Removing Fluorine from Spent Cathode Carbon: Optimization of the Process by Response Surface Methodology

Effect of Na2SO4 on the Embedding Direct Reduction of Beach Titanomagnetite and the Separation of Titanium and Iron by Magnetic Separation

Optimization of Hot Extrusion Parameters of TiB2/Al Composite Based on Murty Criterion