Abstract:Electric arc furnace dust (EAFD) is a hazardous solid waste generated as a byproduct in the steelmaking process, containing significant amounts of zinc and iron, making it a primary secondary source of zinc. The separation of zinc and iron in an environmentally-friendly and efficient manner poses a crucial technological challenge for the safe disposal and resource utilization of EAFD, facilitating the recovery of valuable zinc and the direct reuse of iron as raw materials for ironmaking. In this study, a novel method for restructuring zinc-bearing phases into sulfated compounds through low-temperature roasting by introducing FeS in EAFD were proposed. Simultaneously, the iron-containing phases undergo a transformation into Fe 2 O 3 . Subsequently, efficient separation of zinc and iron is achieved through a leaching process using dilute sulfuric acid. The conditions for the theoretical transformation of zinc-containing phases into ZnSO 4 and iron-containing phases into Fe 2 O 3 in EAFD were determined by thermodynamic calculations incorporating FeS. The temperature range for sulfation calcination was determined to be within 550–700 °C based on TG-DSC analysis and the evaluation of SO 2 release during the decomposition of FeS. The optimal conditions for the roasting process were determined as an E/F ratio of 1:3, a temperature of 650 °C, and a duration of 3 h. In addition, the optimal conditions for the leaching process were determined as the addition of 1 mL of 1 M H 2 SO 4 and a liquid–solid ratio of 25 mL/g. Under these conditions, the extractions of Zn and Fe reached 95.33 % and 0.17 %, respectively. The mechanism of phase reconstruction from zinc-containing phases to sulfate phases in EAFD was thoroughly analyzed, revealing that the Zn species in EAFD were transformed into Zn 3 O(SO 4 ) 2 through solid–solid and gas–solid reactions, while the majority of Fe species in EAFD and FeS were converted into Fe 2 O 3 . Effective separation of zinc and iron was achieved by dissolving Zn 3 O(SO 4 ) 2 in diluted sulfuric acid while retaining Fe 2 O 3 in the residue. This study provides a fresh perspective on the recovery of zinc from zinc-containing solid waste resources, offering significant potential for the sustainable management and utilization of EAFD.

Synergetic Utilization of Zinc-Bearing Dust by Carbothermic Reduction-Roasting Process: Phase Transformation and Morphological Evolution

Green and Efficient Utilization of Ferruginous Gibbsite Ore and Ferruginous Manganese Ore by Synergetic Carbothermic Co-Reduction–Magnetic Separation Process

Mineral Phase Reconstruction and Separation Behavior of Zinc and Iron from Zinc-Containing Dust

FeS-assisted restructuring of zinc-bearing phases into sulfated compounds for efficient zinc extraction from hazardous electric furnace dust

A high-efficiency separation process of Fe and Zn from zinc-bearing dust by direct reduction

Separation of Iron and Zinc Values from Blast Furnace Dust Adopting Reduction Roasting-Magnetic Separation Method by Sawdust Pyrolysis

Recovery of zinc from zinc oxide dust containing multiple metal elements by carbothermal reduction

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

Phase Transformation Analysis and Process Optimisation of Low-Grade Lead–Zinc Oxysulphide Ore Carbothermal Reduction

Volatilization Kinetics of Zinc from the Flotation Products of Low-Grade Lead–Zinc Oxide Ore during Carbothermic Reduction

Mechanisms and kinetics of zinc and iron separation enhanced by calcified carbothermal reduction for electric arc furnace dust

A novel approach for the resource utilization of zinc-bearing dust and sludge via the blast furnace main trough

Effect Of Roasting Temperature On Phase Transformation In Co-Reduction Roasting Of Nickel Slag

Thermodynamic and experimental study of high-temperature roasting of blast furnace gas ash for recovery of metallic zinc and iron

Efficient extraction and separation of zinc and iron from electric arc furnace dust by roasting with FeSO<sub>4</sub>?7H<sub>2</sub>O followed by water leaching

Effective separation of Zn, Fe, and Mn from roasting-water leaching solution of blast-furnace dust using a precipitation-solvent extraction process

Low Carbon and High Efficient Utilization of Zinc-bearing Dust in Iron & Steel Industry by Rotary Kiln Process

Optimisation of hybrid process to recover zinc from electric arc furnace dust using design of experiment approach

Separation of Zinc from Zinc Ferrite by Magnetization Roasting and Ammonia Leaching

Removal behavior of Zn and alkalis from blast furnace dust in pre-reduction sinter process

Recovery of zinc from electric arc furnace dust by vacuum carbothermal reduction