Abstract:In this study, with the meso-scale model reliably validated in our previous work (Construction and Building Materials, 2018), the waveform features of plain concrete under various loading conditions and especially with considering stress non-equilibrium are reliably reproduced and predicted. Associating with waveform features, the violation indicator of the specimen stress equilibrium in the split Hopkinson pressure bar test is identified for concrete-like damage softening materials. The concrete material behaviors for stress non-equilibrium are further analyzed, e.g. the dynamic increase factor (DIF) and damage development, etc. The conception of "damage failure volume" is introduced, and a new method of defining the development of concrete dynamic damage is given in the numerical study. What's more, the "compression wave" and "double peak" phenomena observed in the experiment are further interpreted based on the means of numerical simulation. Waveform features how to reflect the concrete material properties is also concluded. The results show that, the disappearance of the "double peak" phenomenon of reflection curve under high strain rate can be regarded as the indicator of the violation of stress equilibrium. After the violation of the stress equilibrium, the relevant DIFs of the concrete specimen will not change significantly. Especially, the concrete specimen will turn into structural response from material response. The conception of "damage failure volume" can well explain the generation of the "double peak" phenomenon of the reflection curve. The "compression wave" phenomenon of reflection curve under lower strain rates is derived from the unloading expansion recovery of the concrete specimen. Furthermore, under the same loading condition, the amplitude of the first peak of the reflection curve can be used as the evaluation standard of the bonding quality between mortar and aggregates.

An experimental investigation of pre-loading effects on the dynamic behaviour of concrete

Experimental Studies on Concrete Filled Steel Tubes under High Strain Rate Loading

Compressive Impact Tests of Lightweight Concrete with 155-Mm-diameter Spilt Hopkinson Pressure Bar

Experimental Investigation on the Dynamic Compressive Behavior of Rubberized Concrete

High-strain Rate Compressive Behavior of Concrete Made with Substituted Coarse Aggregates: Recycled Crushed Concrete and Clay Bricks

Dynamic Behavior of Reactive Powder Concrete in Split Hopkinson Pressure Bar Testing

Influence of Static Pre-Loading on the Dynamic Bending Strength of Concrete with Particle Element Modeling

Effect of initial static load on the rate-sensitive behavior of concrete in compression

Study on Dynamic Compressive Properties of Concrete with Different Loading Paths

Numerical study of the compressive behavior of concrete material at high strain rate with active confinement

Experimental Research on Static and Dynamic Characteristics of Cement Soil under Strain Control

Experimental investigation of rigid confinement effects of radial strain on dynamic mechanical properties and failure modes of concrete

An Experimental Study of Dynamic Compression Performance of Self-Compacting Concrete

Experimental investigation of the dynamic mechanical properties of concrete under different strain rates and cyclic loading

EFFECT OF STRAIN RATE ON THE BIAXIAL COMPRESSIVE BEHAVIOR OF CONCRETE

Effect of Pore Liquid Viscosity on the Dynamic Compressive Properties of Concrete

Effect of water pressure on mechanical behavior of concrete under dynamic compression state

Numerical study of the influences of pressure confinement on high-speed impact tests of dynamic material properties of concrete

A microscopic approach to rate effect on concrete strength under combine load

High strain rate compressive strength behavior of cemented paste backfill using split Hopkinson pressure bar

Further numerical investigation on concrete dynamic behaviors with considering stress non-equilibrium in SHPB test based on the waveform features