Abstract:Cementitious materials, mainly in the form of concrete, belong to a class of macroscopically heterogeneous materials. The building technology of mass concrete structures enables large-sized coarse aggregate to be used. The maximum coarse aggregate size, in conjunction with the mechanical properties of the interfacial transition zone (ITZ), have great influences on the mesoscopic crack path and the macroscopic mechanical behavior of concrete. Herein this study, based on some pioneering work (Stroeven, 2000; Rossello and Elices, 2004, Rossello et al., 2006; Elices and Rocco, 2008), the effects of varying the maximum coarse aggregate size and the ITZ strength on the global mechanical properties of concrete in direct tension are theoretically modelled from a mesoscopic point of view. The particle size effect behavior of concrete is analyzed based on the proposed theoretical method, and some general conclusions can be drawn as: (1) The degree of tortuosity of the mesoscopic crack path in direct tension increases with increasing maximum coarse aggregate size and with decreasing ITZ strength; (2) The fracture energy and the tensile strength of concrete increase dramatically with increasing ITZ strength; (3) For normal strength concrete, the fracture energy and the tensile strength decrease with increasing maximum coarse aggregate size, while for relatively high strength concrete, the trends are the opposite; (4) The properties of ITZ could significantly affect the homogeneity of concrete. High quality ITZ could make the mechanical properties of concrete more homogeneous and get a relatively high strength concrete, consequently a short characteristic length and a high brittleness number are resulted; (5) For normal strength concrete, the characteristic length increases with increasing maximum coarse aggregate size, while for relatively high strength concrete, it is fairly insensitive to the maximum coarse aggregate size. It is hoped that this theoretical method may be helpful in the study of size effect and in the design of concrete and future cementitious materials.

A microscopic approach to rate effect on concrete strength under combine load

A Microscopic Approach to Rate Effect on Compressive Strength of Concrete

Rate Effect of Concrete with a Simplification of Crack Interaction

Rate effect of concrete strength under initial static loading

Micro-mechanism of Static and Dynamic Strengths for Saturated Concrete

An Explanation for Rate Effect of Concrete Strength Based on Fracture Toughness Including Free Water Viscosity

Effect of initial static load on the rate-sensitive behavior of concrete in compression

Effect of Pore Liquid Viscosity on the Dynamic Compressive Properties of Concrete

Saturation Effect on Dynamic Tensile and Compressive Strength of Concrete

Failure mechanism of concrete in dynamic loading

Effect of water pressure on mechanical behavior of concrete under dynamic compression state

Nonlinear Mechanical Effect of Free Water on the Dynamic Compressive Strength and Fracture of High-Strength Concrete

Parametric Analysis on Compressive Strain Rate Effect of Concrete Using Mesoscale Modeling Approach

Dynamic Strength of Concrete under Initial Static Load

Study of dynamic behavior of concrete under splitting tensile tests based on mesomechanics

Comparative Analysis of Microdamage-affected Chloride Transport in Concrete under Static and Dynamic Hydraulic Pressure

Loading Rate Effect on the Double-K Fracture Parameters of Concrete

Meso-mechanism of Effects of Free Water on Mechanical Properties of Concrete under Confined Compression

Static and Dynamic Meso-Failure-mechanism of Concrete under Confined Compression

Strain-rate sensitivity of concrete: Influence of moisture content

A Theoretical Method to Determine the Tortuous Crack Length and the Mechanical Parameters of Concrete in Direct Tension—a Particle Size Effect Analysis