Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Experimental Investigation on the Dynamic Compressive Behavior of Rubberized Concrete

Dynamic Behavior of Reactive Powder Concrete in Split Hopkinson Pressure Bar Testing

Experimental investigation on the dynamic tensile behavior of graded steel-fiber RPC

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Compressive Impact Tests of Lightweight Concrete with 155-Mm-diameter Spilt Hopkinson Pressure Bar

Experimental Studies on Concrete Filled Steel Tubes under High Strain Rate Loading

High-strain Rate Compressive Behavior of CFRP Confined Concrete: Large Diameter SHPB Tests

Experimental research on seismic behavior of concrete-filled reactive powder concrete tubular columns

Compressive Behavior of Rubberized Concrete under High Strain Rates

Experimental investigation on the impact resistance of rubber self-compacting concrete

Dynamic uniaxial compression mechanical properties of self-compacting rubber concrete subjected to different strain rates

Experimental investigation on static compressive toughness of steel fiber rubber concrete

Dynamic Compression Properties and Constitutive Model with Strain Rate Effect of Rubber Material

Research on static mechanical properties of high-performance rubber concrete

One-Dimensional Dynamic Compressive Behavior of EPDM Rubber

Experimental Investigation on the Compressive Behavior of Rubber–Sand Mixtures under Repeated Loading–Unloading

Compressive Test Investigation and Numerical Simulation of Polyvinyl-Alcohol (PVA)-Fiber-Reinforced Rubber Concrete

An Experimental Study of Dynamic Compression Performance of Self-Compacting Concrete

Long term behavior of rubberized concrete under static and dynamic loads

Experimental Study and Failure Criterion Analysis on Combined Compression-Shear Performance of Rubber Concrete (RC) with Different Rubber Replacement Ratio

Study on Dynamic Compressive Properties of Concrete with Different Loading Paths