Abstract:Ethylene-propylene-diene monomer (EPDM) is a key engineering material; its mechanical characterization is important for the safe use of the material. In this paper, the coupled effects of thermal degradation temperature and time on the tensile mechanical behavior of EPDM rubber were investigated. The tensile stress-strain curves of the aged and unaged EPDM rubber show strong nonlinearity, demonstrating especially rapid stiffening as the strain increases under small deformation. The popular Mooney–Rivlin and Ogden (N = 3) models were chosen to fit the test data, and the results indicate that neither of the classical models can accurately describe the tensile mechanical behavior of this rubber. Six hyperelastic constitutive models, which are excellent for rubber with highly nonlinearity, were employed, and their abilities to reproduce the stress-strain curve of the unaged EPDM were assessed. Finally, the Davis–De–Thomas model was found to be an appropriate hyperelastic model for EPDM rubber. A Dakin-type kinetic relationship was employed to describe the relationships between the model parameters and aging temperature and time, and, combined with the Arrhenius law, a thermal aging constitutive model for EPDM rubber was established. The ability of the proposed model was checked by independent testing data. In the moderate strain range of 200%, the errors remained below 10%. The maximum errors of the prediction results at 85 °C for 4 days and 100 °C for 2 and 4 days were computed to be 17.06%, 17.51% and 19.77%, respectively. This work develops a theoretical approach to predicting the mechanical behavior of rubber material that has suffered thermal aging; this approach is helpful in determining the safe long-term use of the material.

One-Dimensional Dynamic Compressive Behavior of EPDM Rubber

Experimental Investigation on the Dynamic Compressive Behavior of Rubberized Concrete

Novel Model for Uniaxial Strain‐rate–dependent Stress–strain Behavior of Ethylene–propylene–diene Monomer Rubber in Compression or Tension

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Compressive Behavior of Engineered Cementitious Composites under High Strain-Rate Loading

Mechanical Behaviors of Copolymer Elastomers: Experimental Characterization and Constitutive Modelling

Dynamic Compression Properties and Constitutive Model with Strain Rate Effect of Rubber Material

Investigation of Time-Dependent Characteristics of EPDM Rubber Gasket Used for Shield Tunnels

Phenomenological Modeling of the Stress-Stretch Behavior of EPDM Rubber with Loading-rate and Damage Effects

Dynamic uniaxial compression mechanical properties of self-compacting rubber concrete subjected to different strain rates

Tension Testing of Silicone Rubber at High Strain Rates

A rate-dependent aging constitutive model of EPDM rubber

Non-linear Static and Dynamic Mechanical Properties and Constitutive Relation of Sponge Rubber

Research of Dynamic Mechanical Behavior and Constitutive Model of Rubber Under Different Temperatures

Experimental Investigation and Constitutive Modeling of Uncured Carbon Black Filled Rubber at Different Strain Rates

Dynamic Anisotropic Behavior Of Amorphous Polymers

Tension responses of carbon black filled rubbers at intermediate and high strain rates: Experimental investigation and modeling

High Strain-Rate Compressive Response of Epoxy Composites

Constitutive Model for Thermal-Oxygen-Aged EPDM Rubber Based on the Arrhenius Law

Experimental Study of Yield Surface in Polypropylene Considering Rate Effect: Stress Path Dependence

Compressive Behavior of Rubberized Concrete under High Strain Rates