Abstract:This study was aimed to investigate the effect of steel, polypropylene (PP), and hybrid (steel + PP) fibers on high-temperature mechanical properties of reactive powder concrete (RPC). The mechanical properties considered are cubic compressive strength, axial or prismatic compressive strength, split-tensile strength, flexural strength, elastic modulus, peak strain, and stress-strain behavior. The strength recession due to high temperature was investigated at micro level by scanning electron microscope, energy dispersive X-ray spectroscopy, X-ray diffraction, mercury intrusion porosity, thermogravimetric, and differential scanning calorimetry analyses. The high-temperature tests were carried out at target temperatures of 120, 300, 500, 700, and 900 °C. The hot-state compressive strength of RPC started to decrease at 120 °C; however, a partial recovery at 300 °C and a gradual decrease above 300 °C were observed. The degradation of split-tensile strength, flexural strength, and elastic modulus were gradual with increasing temperature despite the effect of different fibers. Whereas, the peak strain was gradually increasing up to 700 °C. However, after 700 °C, it remained unchanged. Steel fiber reinforced RPC (SRPC) and hybrid fiber reinforced RPC (HRPC) showed a ductile behavior. PP fiber reinforced RPC (PRPC) showed a quite brittle behavior up to 300 °C; however, further heating made the microstructure porous and it became ductile too. Overall the performance of SRPC and HRPC were superior to PRPC because of higher modulus of elasticity, higher strength, and better fire resistance of steel fibers. Fiber reinforced RPC was found to have better fire resistance than traditional types of concrete based on comparative studies with the provisions of design codes and earlier research. The constitutive equations developed can be utilized in computer programs for structural design of RPC structures exposed to fire.

Dynamic Behavior of Reactive Powder Concrete in Split Hopkinson Pressure Bar Testing

Experimental investigation on the dynamic tensile behavior of graded steel-fiber RPC

Experimental Investigation on the Dynamic Compressive Behavior of Rubberized Concrete

Experimental Research the Shearing Performance of Grading-Fiber Reinforced Reactive Powder Concrete

Experimental Study on the Spalling Strength of Fiber Reactive Powder Concrete

Compressive Impact Tests of Lightweight Concrete with 155-Mm-diameter Spilt Hopkinson Pressure Bar

Experimental research on seismic behavior of concrete-filled reactive powder concrete tubular columns

A review on split Hopkinson bar experiments on the dynamic characterisation of concrete

Investigation on the Deformation and Failure Characteristics of Concrete in Dynamic Splitting Tests

Experiment on Thermophysical Properties of Reactive Powder Concrete

Research on Compressive Impact Dynamic Behavior and Constitutive Model of Polypropylene Fiber Reinforced Concrete

Effect of Pressurized Oil on the Mechanical Properties of Reactive Powder Concrete

Experimental Study on Mechanical Properties of Synthetic Macro-Fiber Reinforced Reactive Powder Concrete

Effect of Fibers on High-Temperature Mechanical Behavior and Microstructure of Reactive Powder Concrete

Experimental Research on Preparation of Reactive Powder Concrete

Study of Mechanical Properties of Reactive Powder Concrete with Additives

Reactive Powder Concrete: Durability and Applications

Study on the bonding performance between reactive powder concrete and steel bar

Numerical study of the influences of pressure confinement on high-speed impact tests of dynamic material properties of concrete

Dynamic compressive and splitting tensile tests on mortar using split Hopkinson pressure bar technique

Study on the Dynamic Mechanical Properties of Ultrahigh-Performance Concrete under Triaxial Constraints