Abstract:Recent improvements in Selective Laser Sintering (SLS) technology have prompted researchers to examine the fabrication method as a solution for patient-specific orthopedic issues. Although SLS remains a desirable method for sintering polymer materials, poor selection of process parameter ranges can reduce the porosity of manufactured components and decrease the mechanical performance. This study aims to identify the optimal combination of process parameters to enhance the porosity of the manufactured parts without compromising scaffold strength. Using the SLS technology and response surface methodology-based Box–Behnken design, 17 polymer-based scaffolds were manufactured. Further, the fabricated samples are subjected to compression and porosity tests to determine the effect of pore size, laser power, and scanning speed. To establish an optimum parameter combination, desirability function approach was used. The pore size of 0.6 mm, laser power of 3 W, and scanning speed of 1545 mm/s are found as the optimal parameter combination. Compression strength of 69 MPa and porosity of 35.6% were achieved at the optimal set. The compressive strengths of scaffolds manufactured using the optimal process set are close to the upper limit of the compressive strength of a human fibula bone (67 MPa). Scanning Electron Microscopy (SEM) images were subsequently used to validate the scaffold's porosity at the optimal process factor set. In the development of this work, the study also evaluated the ability of Machine Learning (ML) techniques, namely Gaussian Process Regression (GPR) and Support Vector Machine (SVM), to predict the output responses of scaffold parts. With a coefficient of determination of 0.96, the SVM method exceeds the GBR in terms of its predictive capabilities.

ELK Asia Pacific Journals – Special Issue ISBN: 978-81-930411-8-5 OPTIMAL PROCESS PARAMETERS SELECTION OF LASER TRANSMISSION WELDING OF POLYCARBONATE USING CUCKOO SEARCH ALGORITHM OPTIMIZATION OF LASER TRANSMISSION WELDING PROCESS USING CUCKOO SEARCH ALGORITHM

Optimization of Laser Transmission Welding Parameters Using Chicken Swarm Optimization Algorithm: Chicken Swarm Algorithm Optimization of Laser Transmission Welding

Parameters optimisation of transmission laser welding of dissimilar plastics using RSM and flower pollination algorithm integrated approach

Parametric Study of Through Transmission Laser Welding using Particle Swarm Optimization

Optimization of Laser Transmission Welding Process Parameters Using Single Objective and Multi Objective Optimization Technique

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

Simultaneous optimization of process parameters during abrasive water jet machining on glass fibre reinforced polymer

A Combined RSM – FEM Analysis of Weld Quality in Laser Transmission Welding of Plastics

Accelerated cuckoo optimization algorithm for the multi-objective welding process

Process Parameter Optimization for CO2 Laser Polishing of Fused Silica Using the Taguchi Method

Application of Response Surface Methodology and Machine Learning Approaches to Predict Porosity and Compression Strength of Selective Laser-Sintered Polyamide-12 Scaffold Parts

Experimental Investigation on Laser Transmission Welding of Polycarbonate and Acrylic

Optimization of CNC CO2 Laser Cutting Process Parameters on Acrylic Cutting Using Taguchi Grey Relational Analysis and Response Surface Methodology

Advancements in metaheuristic optimization techniques for laser beam cutting of FRP composites: A review

Optimization of heat affected zone in laser cutting of Kevlar-29 fiber composite using hybrid response surface based grey wolf optimization (RSGWO) algorithm

Optimization and GRA prediction of Al–Cu pulsed laser welding process based on RSM

Multi-objective Optimization of Electric Discharge Machining of Al-SiCp Composite by Taguchi-PCA, Firefly and Cuckoo Search Algorithm

Optimizing CO2 laser beam welding parameters for magnesium hybrid metal matrix composites (ZE41A)

A combined approach of artificial neural network, multi-objective genetic algorithm, and response surface methodology for enhanced PMMA micro-channeling in low power fiber laser beam machining

Determination of process parameters for selective laser melting of inconel 718 alloy through evolutionary multi-objective optimization

Mathematical modelling of carbon emissions and process parameters optimisation for laser welding cell