Abstract:Morphology and distribution of intermetallic compounds in the heat-affected zone (HAZ) are easily altered during welding thermal cycles, contributing to the softening of the HAZ. Finding solutions to mitigate the softening and enhance the strength of the joint is currently at the forefront of Mg alloy processing and manufacturing. In this work, 0.7 mm thick Ce-containing Mg alloy sheets were successfully joined using fiber laser welding. The microstructure of the joint was observed employing scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and transmission electron microscopy (TEM). Accordingly, the phase compositions in both HAZ and fusion zone (FZ) were determined. Subsequently, the mechanical properties of the joint were evaluated through tensile-shear and hardness tests. The results revealed that the HAZ experienced softening, retaining 76.6% of the strength of the base metal in the tensile-shear test. Interestingly, intermetallics composed of conventional alloying elements within the HAZ transformed into coral-like structures during the welding thermal cycles, whereas the morphology and distribution of intermetallics containing rare-earth (RE) elements barely changed. As a result, the joint exhibited cracks along the boundaries of the coral-like precipitates during tensile loading. In comparison, both intermetallics consisting of conventional elements and those containing RE elements were fragmented into micron-sized fine particles in the FZ, leading to an increase in the strength of the FZ. Ultimately, the mechanisms responsible for the softening of the HAZ and the strengthening of the FZ were elucidated, presenting a promising welding solution for Mg alloys.

Optimizing CO2 laser beam welding parameters for magnesium hybrid metal matrix composites (ZE41A)

Investigation of interfacial microstructure and connection mechanism of magnetic field-assisted magnesium/aluminum laser welding joint

Influence of CO2 Laser Beam Welding Process Parameters on Mechanical Properties of Alloy AISI 4130 Steel Welded Joints

Formation and mechanical properties of AZ31B magnesium alloy welds by power-modulated oscillating laser

Microstructure Evolution and Mechanical Properties of 20%SiCp/Al Joint Prepared via Laser Welding

Effects of Laser Welding Parameters on the Porosity and Acicular Phase in SiCp/6092 Aluminum Matrix Composite Welded Joints

Investigations on Laser Welding of Magnesium Alloys

Joint performance of CO2 laser-MIG hybrid welding 5083-H116 alloy

Laser Processing of Mg-10Li-3Al-3Zn Alloy： Part Ⅰ – Microstructure and Properties of Laser Welded Joints

Experimental Investigation of WE43(T6) magnesium metal matrix composites to enhance mechanical properties and EDM process parameters

Laser-arc hybrid welding of AZ31B magnesium alloy by newly-designed beam oscillating pattern

Process Optimization and Performance Evaluation on Laser Beam Welding of Austenitic/martensitic Dissimilar Materials

Investigation of Laser-MIG Hybrid Welding of Al-Mg-Si Aluminum Alloy

Optimization of Laser Welded Joints of Steel/Al with Pre-placed High-Entropy Alloy Powder

Identification of intermetallics in the laser-welded joint of rare-earth magnesium alloy and the corresponding strengthening mechanisms

Investigation of the microstructure and mechanical properties of Mg–Al–Zn alloy joints formed by different laser welding processes

Research on Welding Quality Optimization of Ultra-High Strength Steel Welding Joint Under Different Laser Energy Inputs

Microstructure homogeneity and mechanical properties of laser-arc hybrid welded AZ31B magnesium alloy

Influence of CO_2 laser-MIG hybrid welding process on weld formation of 6005A aluminum alloy

Laser processing of Mg-10Li-3Al-3Zn alloy: Part I – Microstructure and properties of laser welded joints

Impact of power modulation on weld appearance and mechanical properties during laser welding of AZ31B magnesium alloy