Abstract:Because aluminum and steel have different characteristics, directly joining them one cannot obtain desired Al/steel welded joint. In order to improve the Al/steel resistance spot welding (RSW) process and achieve a goal of obtaining welded joint with satisfactory quality, this work analyzed the process using dynamic resistance variation. A whole Al/steel RSW process can be divided into three stages: no nugget stage, Al nugget stage and Al/steel double nuggets stage, according to different melting times of the parent metal sheets, which can be reflected in the dynamic resistance profile. Two optimization measures, which are increasing the roughness of contact surface between two parent metals and using spherical electrodes to replace traditional planar electrodes, are proposed. A two-dimensional (2D) numerical model was established and the calculation results showed that the optimization measures could increase the sizes of aluminum nugget and enable earlier melting of two metal sheets. In addition, a series of comparative welding experiments were conducted. Corresponding measurement and analysis results showed that the two optimization measures could improve the tensile-shear strength of the Al/steel welded joint, respectively, by 6.35% ~ 35.33% and 11.63% ~ 81.22%, with a corresponding comprehensive percentage improvement in at least 24.41%. Also, the measurers could promote the wetting and spreading level of liquid aluminum on the surface of solid steel, decrease length of cracks at the edge of the welded joint, and decrease intermetallic compound (IMC) layer thickness and make its distribution more even. This work provides information for process improvement and optimization in dissimilar metal welding.

Optimization and GRA prediction of Al–Cu pulsed laser welding process based on RSM

Statistical analysis of process parameters to eliminate hot cracking of fiber laser welded aluminum alloy

Optimization of laser welding thin-gage galvanized steel via response surface methodology

Optimization of Laser Spiral Welding Using Response Surface Methodology and Genetic Algorithms.

Process Parameter Optimization in Refill Friction Spot Welding of 6061 Aluminum Alloys Using Response Surface Methodology

Optimization of Joining Parameters in Pulsed Tungsten Inert Gas Weld Brazing of Aluminum and Stainless Steel Based on Response Surface Methodology

Optimization for Laser Welding Fillet Joint Based on Response Surface Method

Multi-objective optimization of laser welding parameters for steel/Al based on Kriging-MSSA

Optimization of Welding Parameters on Pores Migration in Laser-GMAW of 5083 Aluminum Alloy Based on Response Surface Methodology

Correlation of Process Parameters and Porosity in Laser Welding of 7A52 Aluminum Alloy Using Response Surface Methodology

Optimization of processing parameters for pulsed laser welding of dissimilar metal interconnects

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

Modeling and Optimization of Laser Transmission Joining Process Between PET and 316L Stainless Steel Using Response Surface Methodology

Multi-objective optimization of T-shaped bilateral laser welding parameters based on NSGA-II and MOPSO

Process optimization of aluminum/steel resistance spot welding based on dynamic resistance analysis

Research on Welding Quality Optimization of Ultra-High Strength Steel Welding Joint Under Different Laser Energy Inputs

Research on the Surface-State Parameterization of a Refill Friction Stir Spot Welding Joint Made of Aluminum Alloy and Its Connection to the Fracture Mode

The mathematical model for the prediction and optimization of weld bead geometry in all-position low-power pulsed laser-MAG hybrid welding

Mechanical Characterization and Prediction of Aluminum Alloy Laser Welding Joints Including Roles of Geometries and Porosity

Multi-objective Optimization in Selective Laser Melting of AlSi10Mg Alloy Based on Response Surface Methodology

Numerical simulation and welding parameters optimization for minimum deformation of AHSS based on RSM & QGA