Abstract:The laser powder bed fusion (PBF-LB) process provides great potential for additive manufacturing of the Invar 36 alloy, which possesses a unique low coefficient of thermal expansion. However, the high-temperature tensile behavior of PBF-LB processed Invar 36 alloy has not been explored, severely restricting its applications. Hence, herein, in-situ X-ray computed tomography (XCT) tensile tests were conducted at 200 °C and 600 °C for PBF-LB processed Invar 36 alloy, and the microstructure after heat treatment, fracture morphology, post-mortem microstructure, and nano-precipitates were observed. The in-situ XCT analysis of damage evolution reveals that the tensile behavior at elevated temperatures is sensitive to numerous closely spaced LOF pores with relatively large equivalent diameters, distributed in the adjacent melt pools or deposited layers. These LOF pores promote the stress concentration and facilitate rapid crack propagation, resulting in a significantly diminished strength and ductility. In contrast, the small number of metallurgical and keyhole pores, possessing large spacing and relatively high sphericity, have negligible influence on the tensile behavior. Therefore, Invar 36 alloy with only metallurgical and keyhole pores can be considered defect-free, displaying an excellent yield strength of 360.0 MPa and a considerable elongation of 65.0% at 200 °C. However, as the temperature increases to 600 °C, both the yield strength and elongation show a marked decrease to 150.0 MPa and 5.4%, respectively. This weakening is accompanied by the observation of a brittle fracture and the formation of secondary cracks. The degradation in mechanical properties can be attributed to the decomposition of Cr-containing SiP 2 O 7 , which leads to the formation of numerous small-sized SiO 2 and P 2 O 5 precipitates at 600 °C. These precipitates induce embrittlement of the grain boundaries and contribute to the formation of secondary cracks. The anomalous brittle fracture observed is attributed to the intergranular fracture mode, which results from the low grain boundary energy as well as the decomposition of nanoprecipitates. Additionally, the perpendicular orientation of flatter columnar grain boundaries to the loading direction plays a role in the formation of secondary cracks. This high-temperature mechanical performance of strength, elongation, failure mode, and corresponding microcosmic mechanism advances the understanding and widespread application of PBF-LB processed Invar 36 alloy.

In-situ X-ray computed tomography of high-temperature tensile behavior for laser powder bed fused Invar 36 alloy

Effect of Processing Parameters on the Microstructure, Mechanical Properties and Thermal Expansion Behavior of Invar 36 Alloy Manufactured by Laser Powder Bed Fusion

Microstructure Evolution and Corrosion Behavior of Invar 36 Alloy Additively Manufactured Via Laser Powder Bed Fusion

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

High cycle fatigue behaviour of Invar 36 alloy fabricated by laser powder bed fusion

Anisotropy of microstructure, mechanical properties and thermal expansion in Invar 36 alloy fabricated via laser powder bed fusion

Influence of laser powder bed fusion process on microstructures and low cycle fatigue performance of Invar 36 alloy

Comparative Investigation of Fatigue Properties Between Additively and Conventionally Manufactured Invar 36 Alloy

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Influence of Addition of Ti Particles and Processing Condition on Microstructure and Properties of Selectively Laser-Melted Invar 36 Alloy

Insight into Elongation and Strength Enhancement of Heat-Treated LPBF Ni-based Superalloy 718 Using In-Situ SEM-EBSD

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Origin of the anisotropic ductility and the dynamic recrystallization-like deformation behavior of laser powder bed fusion Inconel 625 at elevated temperature

Influence of Process Parameters on Properties of Super Invar Alloy Fabricated by Laser Powder Bed Fusion for Semiconductor Equipment

Effect of Temperature and Strain Rate on Deformation Behavior of Invar 36 Alloy

On the Role of Microstructure and Defects in the Room and High-Temperature Tensile Behavior of the PBF-LB A357 (AlSi7Mg) Alloy in As-Built and Peak-Aged Conditions

Microstructure, mechanical properties, and deformation behaviour of LPBF 316L via post-heat treatment

Microstructure Evolution and Mechanical Properties of Laser Metal Deposition of Invar 36 Alloy

Microstructure and mechanical properties at elevated temperatures of as-built and heat-treated Inconel 718 produced through laser powder bed fusion processes

Preparation, characterization and composition optimization design of laser powder bed fusion continuously graded Invar36/316L stainless steel alloys

Effect of high preheating on the microstructure and mechanical properties of high gamma prime Ni-based superalloy manufactured by laser powder bed fusion