Abstract:The laser powder bed fusion (PBF-LB) process provides great potential for additive manufacturing of the Invar 36 alloy, which possesses a unique low coefficient of thermal expansion. However, the high-temperature tensile behavior of PBF-LB processed Invar 36 alloy has not been explored, severely restricting its applications. Hence, herein, in-situ X-ray computed tomography (XCT) tensile tests were conducted at 200 °C and 600 °C for PBF-LB processed Invar 36 alloy, and the microstructure after heat treatment, fracture morphology, post-mortem microstructure, and nano-precipitates were observed. The in-situ XCT analysis of damage evolution reveals that the tensile behavior at elevated temperatures is sensitive to numerous closely spaced LOF pores with relatively large equivalent diameters, distributed in the adjacent melt pools or deposited layers. These LOF pores promote the stress concentration and facilitate rapid crack propagation, resulting in a significantly diminished strength and ductility. In contrast, the small number of metallurgical and keyhole pores, possessing large spacing and relatively high sphericity, have negligible influence on the tensile behavior. Therefore, Invar 36 alloy with only metallurgical and keyhole pores can be considered defect-free, displaying an excellent yield strength of 360.0 MPa and a considerable elongation of 65.0% at 200 °C. However, as the temperature increases to 600 °C, both the yield strength and elongation show a marked decrease to 150.0 MPa and 5.4%, respectively. This weakening is accompanied by the observation of a brittle fracture and the formation of secondary cracks. The degradation in mechanical properties can be attributed to the decomposition of Cr-containing SiP 2 O 7 , which leads to the formation of numerous small-sized SiO 2 and P 2 O 5 precipitates at 600 °C. These precipitates induce embrittlement of the grain boundaries and contribute to the formation of secondary cracks. The anomalous brittle fracture observed is attributed to the intergranular fracture mode, which results from the low grain boundary energy as well as the decomposition of nanoprecipitates. Additionally, the perpendicular orientation of flatter columnar grain boundaries to the loading direction plays a role in the formation of secondary cracks. This high-temperature mechanical performance of strength, elongation, failure mode, and corresponding microcosmic mechanism advances the understanding and widespread application of PBF-LB processed Invar 36 alloy.

Effect of Processing Parameters on the Microstructure, Mechanical Properties and Thermal Expansion Behavior of Invar 36 Alloy Manufactured by Laser Powder Bed Fusion

Microstructure Evolution and Corrosion Behavior of Invar 36 Alloy Additively Manufactured Via Laser Powder Bed Fusion

Anisotropy of microstructure, mechanical properties and thermal expansion in Invar 36 alloy fabricated via laser powder bed fusion

Superior Mechanical Properties of Invar36 Alloy Lattices Structures Manufactured by Laser Powder Bed Fusion

In-situ X-ray computed tomography of high-temperature tensile behavior for laser powder bed fused Invar 36 alloy

The puzzling thermal expansion behavior of invar alloys: a review on process-structure-property relationship

Influence of Addition of Ti Particles and Processing Condition on Microstructure and Properties of Selectively Laser-Melted Invar 36 Alloy

Influence of laser powder bed fusion process on microstructures and low cycle fatigue performance of Invar 36 alloy

Thermal expansion and temperature-dependent Young’s modulus of Invar fabricated via laser powder-bed fusion

Analysis of the thermal expansion and mechanical properties of laser cladding of Invar alloy

Preparation, characterization and composition optimization design of laser powder bed fusion continuously graded Invar36/316L stainless steel alloys

Influence of Defects and Microstructure on the Thermal Expansion Behavior and the Mechanical Properties of Additively Manufactured Fe-36Ni

High cycle fatigue behaviour of Invar 36 alloy fabricated by laser powder bed fusion

Effects of the process parameters on the formability and properties of Ni54(at.%) Ti alloys prepared by laser powder bed fusion

Investigation of Temperature-Dependent Magnetic Properties and Coefficient of Thermal Expansion in Invar Alloys

Understanding of process and material behaviours in additive manufacturing of Invar36/Cu10Sn multiple material components via laser-based powder bed fusion

On the role of volumetric energy density in the microstructure and mechanical properties of laser powder bed fusion Ti-6Al-4V alloy

A study of the effect of Ti-Al-V microalloying on the mechanical and physical properties of invar 36

Effect of Laser Energy Density on the Microstructure and Texture Evolution of Hastelloy-X Alloy Fabricated by Laser Powder Bed Fusion

Effect of Heat Input on the Subgrains of Laser Melting Deposited Invar Alloy

Effect of the Heat Input on Wire-Arc Additive Manufacturing of Invar 36 Alloy: Microstructure and Mechanical Properties