Abstract:The laser powder bed fusion (PBF-LB) process provides great potential for additive manufacturing of the Invar 36 alloy, which possesses a unique low coefficient of thermal expansion. However, the high-temperature tensile behavior of PBF-LB processed Invar 36 alloy has not been explored, severely restricting its applications. Hence, herein, in-situ X-ray computed tomography (XCT) tensile tests were conducted at 200 °C and 600 °C for PBF-LB processed Invar 36 alloy, and the microstructure after heat treatment, fracture morphology, post-mortem microstructure, and nano-precipitates were observed. The in-situ XCT analysis of damage evolution reveals that the tensile behavior at elevated temperatures is sensitive to numerous closely spaced LOF pores with relatively large equivalent diameters, distributed in the adjacent melt pools or deposited layers. These LOF pores promote the stress concentration and facilitate rapid crack propagation, resulting in a significantly diminished strength and ductility. In contrast, the small number of metallurgical and keyhole pores, possessing large spacing and relatively high sphericity, have negligible influence on the tensile behavior. Therefore, Invar 36 alloy with only metallurgical and keyhole pores can be considered defect-free, displaying an excellent yield strength of 360.0 MPa and a considerable elongation of 65.0% at 200 °C. However, as the temperature increases to 600 °C, both the yield strength and elongation show a marked decrease to 150.0 MPa and 5.4%, respectively. This weakening is accompanied by the observation of a brittle fracture and the formation of secondary cracks. The degradation in mechanical properties can be attributed to the decomposition of Cr-containing SiP 2 O 7 , which leads to the formation of numerous small-sized SiO 2 and P 2 O 5 precipitates at 600 °C. These precipitates induce embrittlement of the grain boundaries and contribute to the formation of secondary cracks. The anomalous brittle fracture observed is attributed to the intergranular fracture mode, which results from the low grain boundary energy as well as the decomposition of nanoprecipitates. Additionally, the perpendicular orientation of flatter columnar grain boundaries to the loading direction plays a role in the formation of secondary cracks. This high-temperature mechanical performance of strength, elongation, failure mode, and corresponding microcosmic mechanism advances the understanding and widespread application of PBF-LB processed Invar 36 alloy.

Anisotropy of microstructure, mechanical properties and thermal expansion in Invar 36 alloy fabricated via laser powder bed fusion

Effect of Processing Parameters on the Microstructure, Mechanical Properties and Thermal Expansion Behavior of Invar 36 Alloy Manufactured by Laser Powder Bed Fusion

Microstructure Evolution and Corrosion Behavior of Invar 36 Alloy Additively Manufactured Via Laser Powder Bed Fusion

In-situ X-ray computed tomography of high-temperature tensile behavior for laser powder bed fused Invar 36 alloy

Superior Mechanical Properties of Invar36 Alloy Lattices Structures Manufactured by Laser Powder Bed Fusion

Influence of laser powder bed fusion process on microstructures and low cycle fatigue performance of Invar 36 alloy

The Origin of Low Thermal Expansion Coefficient and Enhanced Tensile Properties of Invar Alloy Fabricated by Directed Energy Deposition

Influence of Process Parameters on Properties of Super Invar Alloy Fabricated by Laser Powder Bed Fusion for Semiconductor Equipment

Microstructure Evolution and Mechanical Properties of Laser Metal Deposition of Invar 36 Alloy

Preparation, characterization and composition optimization design of laser powder bed fusion continuously graded Invar36/316L stainless steel alloys

Comparative Investigation of Fatigue Properties Between Additively and Conventionally Manufactured Invar 36 Alloy

The puzzling thermal expansion behavior of invar alloys: a review on process-structure-property relationship

Thermal expansion and temperature-dependent Young’s modulus of Invar fabricated via laser powder-bed fusion

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

High cycle fatigue behaviour of Invar 36 alloy fabricated by laser powder bed fusion

Influence of Addition of Ti Particles and Processing Condition on Microstructure and Properties of Selectively Laser-Melted Invar 36 Alloy

Influence of Defects and Microstructure on the Thermal Expansion Behavior and the Mechanical Properties of Additively Manufactured Fe-36Ni

Anisotropy in Microstructural Features and Tensile Performance of Laser Powder Bed Fusion NiTi Alloys

Microstructure and mechanical property comparison of Inconel alloys fabricated using micro and conventional laser powder bed fusion

Understanding of process and material behaviours in additive manufacturing of Invar36/Cu10Sn multiple material components via laser-based powder bed fusion

Novel isotropic mechanical properties of laser powder-bed fusion Sc/Zr modified Al alloy