Abstract:Recycling of composite materials is an important global issue due to the wide use of these materials in many industries. Waste management options are being explored. Mechanical recycling is one of the methods that allows obtaining polyester-glass recyclate in powder form as a result of appropriate crushing and grinding of waste. Due to the fact that the properties of composites can be easily modified by adding various types of fillers and nanofillers, this is one of the ways to improve the properties of such complex composite materials. This article presents the strength parameters of composites with the addition of fillers in the form of polyester-glass recyclate and a nanofiller in the form of gamma-phase aluminum nanopowder. To analyze the obtained results, Kolmogorov-Sinai (K-S) metric entropy was used to determine the transition from the elastic to the viscoelastic state in materials without and with the addition of nanoaluminum, during a static tensile test. The tests included samples with the addition of fillers and nanofillers, as well as a base sample without any additives. The article presents the strength parameters obtained from a testing machine during a static tensile test. Additionally, the acoustic emission method was used during the research. Thanks to which, graphs of the effective value of the electrical signal (RMS) were prepared as a function of time, the parameters were previously identified as extremely useful for analyzing the destruction process of composite materials. The values obtained from the K-S metric entropy method and the acoustic emission method were plotted on sample stretching graphs. The influence of the nanofiller and filler on these parameters was also analyzed. The presented results showed that the aluminum nanoadditive did not increase the strength parameters of the composite with recyclate as a result of the addition of aluminum nanofiller; however, its addition influenced the operational parameters, which is reflected in a 5% increase in the UTS value (from 55% to 60%).

Solid-phase recycling of non-compact waste of cast metal-matrix composites

Solid-State Synthesis of SiC Particle-Reinforced AZ91D Composites: Microstructure and Reinforcement Mechanisms

Recycling of Aluminum-Based Composites Reinforced with Boron-Tungsten Fibres

Recycling Mechanism of Discontinuously Reinforced Al Matrix Composites

Evolution of Microstructure and Mechanical Properties of Al-B4C Composite after Recycling

Application of Pressure Treatment Methods for Solid Processing of Silumin Chip Waste

Development of the Production Technology of Cast Aluminum Matrix Composite by Alumina Strengthening Phase Synthesis in an Aluminum Melt

Enhanced Mechanical Properties of a Chip-Based Al-Si-Cu-Fe Alloy with an In-Situ Emulsion Decomposition Recycled by Solid-State Processing

Solid state recycling of Mg-Gd-Y-Zn-Zr alloy chips by spark plasma sintering

Solid-state recycling of AZ91D magnesium alloy chips

Microstructural, physical and mechanical characterization of grinding sludge based aluminium metal matrix composite

Comparison Between Spark Plasma Sintering and Hot Extrusion for Solid-State Recycling of Al-Si-Cu-Fe Alloy Chips

Microstructure and mechanical properties of AZ31B magnesium alloy prepared by solid-state recycling process from chips

Fabrication of Al/Al2O3/ SiC/graphene hybrid nanocomposites from Al-dross by powder metallurgy: Sinterability, mechanical and electrical properties

Influence of characteristic parameters of SiC reinforcements on mechanical properties of AlSi10Mg matrix composites by powder metallurgy

The Effect of Ultrasonic Cleaning Upon Mechanical Properties of Metal Matrix Composites

Consolidation behavior of Mg–10Gd–2Y–0.5Zr chips during solid-state recycling

Influence of the Reinforcement Phase Composition on the Structure and Abrasive Wear Resistance of Aluminum Matrix Composites Reinforced with B4C and SiC

Investigation on Mechanical Properties of Agro and Industrial Waste Reinforcement in Aluminium 7075 Composite with Liquid Metal Stir Casting Route

Fly Ash Particle Reinforced AA6061 Composites Produced by Recycling of Aluminum Chips and Fly Ash Particles

Influence of Gamma-Phase Aluminum Oxide Nanopowder and Polyester-Glass Recyclate Filler on the Destruction Process of Composite Materials Reinforced by Glass Fiber