Abstract:Reprocessing municipal wastes into useful engineering components is one way to reduce their environmental impact. This paper presents a report on an alternative experimental approach to reprocessing common environmental wastes like aluminum scraps, steel shavings, and coconut shells into an eco-friendly engineering composite. Equally, response surface analysis was incorporated in the development and validation of predictive models fit for future prediction of response properties. Aluminum scrap was heated into a liquid state and reinforced with recycled steel particles (RSP) and coconut shell ash particles (CSP) at varying proportions. Specimen design involves three group mixes: A, B, and C. Each of the three groups mixes comprised 0, 1, and 2 % RSP at constant dosage, respectively. Meanwhile, each mix was incorporated with 4, 8, and 12 wt % CSP. The microstructural features, physical (porosity, density, and relative density), and mechanical (tensile strength, hardness, elastic modulus, fracture toughness, impact strength, and percentage ductility) properties were examined. The outcome revealed that the combination of the two reinforcements (RSP and CSP) contributed to microstructural evolution within the specimens. The porosities of the composite specimens were reported to marginally increase with the reinforcement combination. Interestingly, the composite exhibited lighter weight with improved mechanical performance. Mathematical models derived for the response properties were certified fit for future analysis and predictions. Meanwhile, the optimization procedure revealed that the combination of 1.3 % RSP and 6.7 % CSP was suitable for the design of optimal recycled aluminum composites for sustainable engineering designs. The results clarified that the reinforcement particles (RSP and CSP) are LOW-COST alternatives to synthetic ceramic reinforcements in the aluminum composite."

Synthesis and characterization of spent alumina catalyst and grinding sludge reinforced aluminium-based composite material

Influence of Nano-CuO on Synthesis and Mechanical Behavior of Spent Alumina Catalyst and Grinding Sludge Reinforced Aluminum Based Composite

Influence of SAC and eggshell addition in the physical, mechanical and thermal behaviour of Cr reinforced aluminium based composite

Alumina catalyst waste utilization for aluminum-based composites using the friction stir process

Microstructural, physical and mechanical characterization of grinding sludge based aluminium metal matrix composite

Development and characterization of grinding sludge-reinforced aluminum-based composite by friction stir process technique

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Development of Aluminum-Based Composite Material by using Bagasse Ash and Eggshell as Reinforcement Along with Nano-CuO Particles

Investigation on Mechanical Properties of Agro and Industrial Waste Reinforcement in Aluminium 7075 Composite with Liquid Metal Stir Casting Route

Investigation on Mechanical Behavior of Al6061- Coconut Shell Ash- Granite Dust Reinforced Hybrid Metal Matrix Composites Manufactured using Stir Casting Technique

Enhancement of mechanical properties and machinability of aluminium composites by cupola slag reinforcementsVerbesserung der mechanischen Eigenschaften und Bearbeitbarkeit von Aluminiumverbundwerkstoffen durch Kupolofenschlackenverstärkungen

Synthesis of novel aluminium metal matrix composite using industrial metallic waste: Impact on wear and corrosion behaviour

Design of aluminum eco-composite for sustainable engineering application by the valorization of municipal wastes: Experimental and response surface analysis

Microstructure, Process Optimization, and Strength Response Modelling of Green-Aluminium-6061 Composite as Automobile Material

Experimental investigation of material properties of Al-Sic-fly ash composite

A Novel Approach in Developing Aluminum Hybrid Green Metal Matrix Composite Material Using Waste Eggshells, Cow Dung Ash, Snail Shell Ash and Boron Carbide as Reinforcements

Experimental Investigation and Comparative Analysis of Aluminium Hybrid Metal Matrix Composites Reinforced with Silicon Nitride, Eggshell and Magnesium

Mechanical Behaviour and Fractured Surface Analysis of Bauxite Residue and Graphite Reinforced Aluminium Hybrid Composites

Characterization and Investigation of Mechanical Properties of Aluminium Hybrid Nano-composites: Novel Approach of Utilizing Silicon Carbide and Waste Particles to Reduce Cost of Material

The utilization of agricultural and industrial waste in the synthesis of AA7075-based novel lightweight composite

Enhancing Aluminum-Based Composite Manufacturing: Harnessing Si3N4 Reinforcement via Stir Casting Technique