Abstract:Carbon skeleton/carbon nanotubes/Ni3ZnC0.7 composites are successfully prepared by in situ growth of Ni3ZnC0.7 and CNTs on 3D melamine sponge carbon. The composite shows lightweight characteristics and can quickly recover to its original state after being pressed. The bandwidth (RL≤ ‐10 dB) for the S60min composite reaches 9.3 GHz and a quite low thermal conductivity of 0.0 9075 W m−1·K can be achieved. The simple and low‐cost construction of a 3D network structure is an ideal way to prepare high‐performance electromagnetic wave (EMW) absorption materials. Herein, a series of carbon skeleton/carbon nanotubes/Ni3ZnC0.7 composites (CS/CNTs/Ni3ZnC0.7) are successfully prepared by in situ growth of Ni3ZnC0.7 and CNTs on 3D melamine sponge carbon. With the increase of precursor, Ni3ZnC0.7 nanoparticles nucleate and catalyze the generation of CNTs on the surface of the carbon skeleton. The minimum reflection loss (RL) value of the S60min composite (loading time of 60 min) reaches ‐86.6 dB at 1.6 mm and effective absorption bandwidth (EAB, RL≤−10 dB) is up to 9.3 GHz (8.7–18 GHz). The 3D network sponge carbon with layered micro/nanostructure and hollow skeleton promotes multiple reflection and absorption mechanisms of incident EMW. The N‐doping and defects can be equivalent to an electric dipole, providing dipole polarization to increase dielectric relaxation. The uniform Ni3ZnC0.7 nanoparticles and CNTs play a key role in dissipating electromagnetic energy, blocking heat transfer, and enhancing the mechanical properties of the skeleton. Fortunately, the composite displays a quite low thermal conductivity of 0.09075 W m·K−1 and good flexibility, which can provide insulation and quickly recover to its original state after being stressed.

Preparation and mechanism analysis of nanocrystalline cellulose-tricalcium silicate paste composite with high electromagnetic transmission performance

Experimental study and mechanism analysis of functional nanocrystalline cellulose to improve the electromagnetic transmission performance of ordinary Portland cement

Dielectric Behaviour of Montmorillonite/cyanoethylated Cellulose Nanocomposites.

Enhanced Thermal Conductivity and Microwave Dielectric Properties by Mesostructural Design of Multiphase Nanocomposite

Preparation, mechanical, dielectric and microwave absorption properties of hierarchical porous SiCnw-Si3N4 composite ceramics

Aqueous Dispersion of Carbon Fibers and Expanded Graphite Stabilized from the Addition of Cellulose Nanocrystals to Produce Highly Conductive Cellulose Composites

The Electromagnetic Wave Absorption Performance and Mechanical Properties of Cement-Based Composite Material Mixed with Functional Aggregates with High Fe2O3 and SiC

Hydration kinetics and mechanism of C 3 S with cellulose nanocrystals

Preparation of SiC Nanowire/Carbon Fiber Composites with Enhanced Electromagnetic Wave Absorption Performance

Regulating synergistic micro-nano pore structure of CNT sponge to control EMI shielding performance

The High-Performance Electromagnetic Wave Absorbing CNT/SiCf Composites: Synthesis, Tuning, and Mechanism.

Investigation of spatial nano-structure development of the hardened C3S pastes by serial block-face SEM

Simultaneously Enhancing Mechanical and Microwave Absorption Properties of Cf/SiC Composites Via SiC Nanowires Additions

High‐temperature electromagnetic wave absorption properties of C f /SiCNFs/Si 3 N 4 composites

Synthesis and tunable electromagnetic shielding and absorption performance of the three-dimensional SiC nanowires/carbon fiber composites

In Situ Loading of Ni3ZnC0.7 Nanoparticles with Carbon Nanotubes to 3D Melamine Sponge Derived Hollow Carbon Skeleton toward Superior Microwave Absorption and Thermal Resistance

Ag-MWCNT Composites for Improving the Electrical and Thermal Properties of Electronic Paste

Tailoring microwave absorption bandwidth of SiCN based composite ceramic fibers by tuning the embedding ratio of Ni3Si

Multifunctional cellulose composite films with dual-continuous CNT/BN networks for synchronously enhanced electromagnetic interference shielding ability and thermal conductivity

Experimental study on the continuous preparation of high‐performance thermal conductivity CNTs/EG/SSBR composite based on the shear and elongation flow fields with the assistance of the silanization reaction

In situ preparation of carbon/Fe3C composite nanofibers with excellent electromagnetic wave absorption properties