Abstract:Process diagram of composite samples and performance test. Currently, with the development of many important fields such as aerospace and automotive industries, polymer composites have become an indispensable part of these fields. As for preparation methods, common methods like hot pressing make composites difficult to achieve continuous production. This paper proposed the continuous forced assembly (CFA) and designed continuous production facility, which can achieve the continuous preparation of low filler content (30 wt%) composites with high electrical/thermal conductivity. Besides, we structurally designed roll pressing device and explored its effect on the machining process. Here, short cut carbon fiber (SCF) and solid silica gel (MVQ) are used as electrically/thermally conductive filler and polymer matrix respectively, and continuous preparation of functional composites is completed by CFA method. Compared to the thermal conductivity (1.186 W/(m·K)) of SCF/MVQ composites prepared with lower viscosity matrix (MVQ‐A), the thermal conductivity of composites prepared with high viscosity matrix (MVQ‐D) reached 2.230 W/(m·K). Meanwhile, the process is optimized to explore the effects of the "accordion folding" and "pre‐stretch" methods on the thermal conductivity of composites, the thermal conductivity is converted from in‐plane to vertical direction. In addition, under the same filler content, 2 wt% rGO is beneficial in enhancing the electrical/thermal conductivity of prepared composites. The electrical conductivity and thermal conductivity of SCF28/rGO2/MVQ composite reach 663 S/m and 2.82 W/(m·K), which is higher than that of the properties of SCF/MVQ composite with the same filler content. To sum up, CFA facilitates continuous production of composites, which can be used in thermal management materials (TMMs). Highlights Compared with the "pre‐stretch" method, the thermal conductivity of SCF/MVQ composites prepared by "accordion folding" has a significant improvement. The SCF/rGO/MVQ composites prepared by CFA method show superior thermal conductivity and electrical conductivity. Composites prepared by CFA method can realize the continuous preparation of functional materials.

Experimental study on the continuous preparation of high‐performance thermal conductivity CNTs/EG/SSBR composite based on the shear and elongation flow fields with the assistance of the silanization reaction

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Preparation of continuous carbon fiber‐filled silicone rubber with high thermal conductivity through wrapping

Preparation of short carbon fiber/polydimethylsiloxane conductive composites based on continuous spatial‐confining network assembly technique

Preparation of branched Al 2 O 3 and its synergistic effect with carbon nanotubes on the enhancement of thermal conductive and electrical insulation properties of silicone rubber composites

Factor analysis on property enhancement of electrically/thermally conductive composites by continuous forced assembly

Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process

Preparation of CNTs/SCF reinforcement using multiple continuous surface treatments to achieve synergistic improvement of epoxy resin-based composites interfacial properties: Towards industrial production of carbon fiber surface treatment

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Fabrication of high-performance thermally conductive and electrically insulating polymer composites with siloxane/multi-walled carbon nanotube core-shell hybrids at low filler content

Continuous SiC skeleton reinforced highly oriented graphite flake composites with high strength and specific thermal conductivity

Enhancing the thermal and electrical conductivities of silicone rubber composites by constructing a 1D‐3D collaborative network

Thermal conductivity and compressive strength of silicone rubber composites enhanced by aligned carbon nanofiber scaffold

Experimental study on preparation and properties of carbon nanotubes-, graphene –natural rubber composites

Free Arc Disperses-Sprays Carbon Nanotubes and Silicon Carbide, Preparing Thermal Silicone Grease

Enhanced composite thermal conductivity by percolated networks of in-situ confined-grown carbon nanotubes

Additive manufacturing of continuous carbon fiber-reinforced silicon carbide composite by fused filament fabrication and precursor infiltration pyrolysis

Thermal management applied laminar composites with SiC nanowires enhanced interface bonding strength and thermal conductivity

Preparation of CNTs/PP@Gr composites with a segregated structure and enhanced electrical and thermal conductive properties by the Pickering emulsion method

Enhancing the Thermal Conductivity of CNT/AlN/Silicone Rubber Composites by Using CNTs Directly Grown on AlN to Achieve a Reduced Filler Filling Ratio

Achieving high thermal conductivity in CNTs@GF/Al laminates via a rapid and simple strategy