Abstract:This study evaluated the potential effect of cellulose nanocrystal and coated polyethylene fiber on the mechanical properties of mortar. Two kinds of cellulose nanocrystals (CNC) directly as Nano-materials, and indirectly as film coated onto the polypropylene fibers were employed as cement-based reinforcement materials. The fluidity, flexural and compressive strength, and the microstructure of each specimen were measured. In the direct method, mortar mixed with the CNC containing carboxyl groups (CNC-C) showed superior properties compared to the CNC containing sulfo groups (CNC-S). The addition of CNC impacted the process of hydration and compactness of hydration products. The results of X-Ray polycrystalline diffractometer (XRD) and heat of hydration showed that CNC accelerated hydration process. Energy spectrum analysis (EDS) measured ratio of calcium to silicon (C/S) of calcium silicate hydrate (C-S-H) and proved that CNC-C increased the tightness of C-S-H while CNC-S decreased. The results of scanning electron microscopy (SEM) indicated that cellulose nanocrystals were interspersed in C-S-H, forming Nano-bridge and arresting Nano-crack. In the indirect method, the maximum increase in flexural strength of sample between all groups was the specimen that adding 0.3% (volume ratio of fiber to mortar) of CNC-C coated polypropylene fibers. The flexural and compressive strength of the mortar were increased by 22.81% and 10.65% compared to the control, respectively. The results of SEM indicated that coating enhanced bond of the fibers/matrix. Molecular dynamics simulation (MD) analyzed the binding energy, microstructure, dynamic characteristics and adsorption conformation between two CNCs and C-S-H at the molecular scale. MD presented clearly that the adsorption energy between CNC-S and C-S-H was much smaller than CNC-C and C-S-H. This was identical with CNC-C enhancing the mechanical properties of the mortar and CNC-S reducing the mechanical properties.

Experimental study and mechanism analysis of functional nanocrystalline cellulose to improve the electromagnetic transmission performance of ordinary Portland cement

Preparation and mechanism analysis of nanocrystalline cellulose-tricalcium silicate paste composite with high electromagnetic transmission performance

Unveil the Role of Nano-Caco3 in Early Shrinkage and Tensile Properties of Cement Paste: from Experimental Work to Modeling

Comparative study on mechanisms for improving mechanical properties and microstructure of cement paste modified by different types of nanomaterials

Effect of Nanocellulose on Early Hydration and Microstructure of Cement Paste under Low and High Water-Cement Ratios

Experiment and molecular dynamics simulation of functionalized cellulose nanocrystals as reinforcement in cement composites

Utilizing industrial byproducts for the manufacture of clay-cellulose nanocomposite cements with enhanced sustainability

Reinforcement of Cement Nanocomposites through Optimization of Mixing Ratio between Carbon Nanotube and Polymer Dispersing Agent

Effect of Carbon Nanotube and Styrene-Acrylic Emulsion Additives on Microstructure and Mechanical Characteristics of Cement Paste

Effect of the Nano-CaCO3 on Hydrated Properties and Interface of Cement Paste

Microstructural Properties of Cement Paste and Mortar Modified by Low Cost Nanoplatelets Sourced from Natural Materials

The Changes in the Inner-Structure and Mechanical Strength of the Composite Cement Materials and Silica-Carbon Nanotube-Nylon 66 Electrospun Nanofibers

Development of cement nanocomposites reinforced by carbon nanotube dispersion using superplasticizers

Mechanical, Thermal and Electromagnetic Properties of Nanographite Platelets Modified Cementitious Composites

Effects of Nano-CaCO_3 Intermediate on Physical and Mechanical Properties of Cement-based Materials

Study on the reinforcing mechanisms of nano silica to cement-based materials with theoretical calculation and experimental evidence

Study on the Hydration and Moisture Transport of White Cement Containing Nanomaterials by Using Low Field Nuclear Magnetic Resonance

Effects of a novel carbon nanomaterial on hydration, mechanics, and chloride binding of cement composites

Modification Effects of Carbon Nanotube Dispersion on the Mechanical Properties, Pore Structure, and Microstructure of Cement Mortar

Effects of cellulose nanofibrils on rheological and mechanical properties of 3D printable cement composites

Effect Of Composite Nano-Addition On Mechanics Strength And Microstructure Of Cement Paste