Abstract:As contemporary aerospace and radar-detecting technologies evolve, hypersonic vehicle components must avoid electromagnetic wave (EMW) detection in extremely harsh environments. In this study, lightweight porous SiC/Si 3 N 4 composite nanowires (SiC/Si 3 N 4 NWs), exhibiting excellent performance of broadband electromagnetic wave absorption (EWA), were successfully prepared via a facile electrostatic spinning and heat treatment in nitrogen atmosphere using phenol-formaldehyde resin (PR) and silica solution as precursors. The nanowire (NW) was composed of carbon-rich SiC and Si 3 N 4 nanograins, and its microstructure and phase composition were regulated by carbon thermal reduction temperature. The EWA performance of the nanowires obtained through carbothermal reduction at 1300 °C, 1400 °C,and 1500 °C was investigated. The nanowires with 15 wt% obtained at 1500 °C were added to a paraffin matrix and the effective absorption bandwidth (EAB) was observed to cover almost the entire C, X, and Ku bands (4.2–18 GHz). Moreover, for a coating thickness of only 2.1 mm, the EAB was as high as 7.12 GHz (10.88–18 GHz), covering the entire Ku-band and achieving a minimum value of reflection loss (RL min ) of - 48 dB at 6.5 GHz. The 3D network structure of SiC/Si 3 N 4 NWs with large specific surface areas and numerous mesopores extended the electromagnetic wave (EMW attenuation route and effectively improved the EWA performance through interfacial synergy between the carbon-rich SiC and Si 3 N 4 nanograins). The strong absorption and wide EAB of the porous SiC/Si 3 N 4 NWs rendered them highly suitable lightweight EMW absorbers in harsh, high-temperature environments.

Preparation of SiC Nanowire/Carbon Fiber Composites with Enhanced Electromagnetic Wave Absorption Performance

Synthesis and tunable electromagnetic shielding and absorption performance of the three-dimensional SiC nanowires/carbon fiber composites

Effect of SiC nanowires on the high-temperature microwave absorption properties of SiCf/SiC composites

Multifunction properties of SiOC reinforced with carbon fiber and in-situ SiC nanowires

Tuning SiC nanowires interphase to improve the mechanical and electromagnetic wave absorption properties of SiCf/SiCnw/Si3N4 composites

High‐temperature electromagnetic wave absorption properties of C f /SiCNFs/Si 3 N 4 composites

Microwave Absorbability of Unidirectional SiC Fiber Composites As a Function of the Constituents’ Properties

Flexible SiC/Si3N4 Composite Nanofibers with in Situ Embedded Graphite for Highly Efficient Electromagnetic Wave Absorption

In-situ growth of SiC nanowire arrays on carbon fibers and their microwave absorption properties

Tailoring microwave absorption bandwidth of SiCN based composite ceramic fibers by tuning the embedding ratio of Ni3Si

Dielectric response and microwave absorption properties of SiCw/SiCf composites derived from carbon fiber

Electromagnetic wave absorption and mechanical properties of SiC nanowire/low-melting-point glass composites sintered at 580°C in air

SiC@Co-CNT Composites with Tunable Electromagnetic Parameters for Microwave Absorption

Multiscale SiCnw and carbon fiber reinforced SiOC ceramic with enhanced mechanical and microwave absorption properties

Synthesis and broadband electromagnetic wave absorption for lightweight porous SiC/Si 3 N 4 composite nanowires

Engineered Core–Shell SiC@SiO2 Nanofibers for Enhanced Electromagnetic Wave Absorption Performance

Constructing hierarchical Ti3SiC2 layer and carbon nanotubes on SiC fibers for enhanced electromagnetic wave absorption

SiC Nanowire Mesh in High-Porosity Silicon Foam for Enhanced Electromagnetic Wave Absorption

In situ construction of hierarchical core-shell SiC nws @SiO 2 -carbon foam hybrid composites with enhanced polarization loss for highly efficient electromagnetic wave absorption

Efficient electromagnetic wave absorption by SiC/Ni/NiO/C nanocomposites

Enhanced antioxidation and microwave absorbing properties of SiC/SiO2 coating on carbon fiber