Abstract:A new kind of structural and functional integration ceramic matrix composite material was prepared from high-performance alumina (Al2O3) fibers and absorbing silicon carbonitride (SiCN) ceramics via a combination of polymer infiltration pyrolysis (PIP) and chemical vapor infiltration (CVI) methods. The Al(2)O(3)fiber annealed at its cracked temperature had enhanced permittivity, because the sizing agent on the Al(2)O(3)fiber surface was cracked into pyrolysis carbon. For PIP + CVI Al2O3f/SiCN composites, PIP SiCN matrix with low conductivity was used as the matching phase, while CVI SiCN matrix with medium permittivity and dielectric loss was regarded as the reinforcing phase distributed in porous PIP SiCN matrix and inter-bundles of Al(2)O(3)fiber to improve their mechanical and microwave absorption properties. The fracture toughness and flexural strength of Al2O3f/SiCN composite were determined to be 9.4 +/- 0.5 MPa m(1/2)and 279 +/- 28 MPa, respectively. Based on the design principles for impedance matching, the Al2O3f/SiCN composites before and after oxidation were used as loss and impedance layers, respectively. It was found that the optimized composite had the lowest reflection coefficient (RC) of -70 dB and the effective absorption bandwidth covering the whole X-band. In conclusion, Al2O3f/SiCN composite can serve as a high-temperature structural material with excellent microwave absorption properties for aerospace applications.

Multiscale SiCnw and carbon fiber reinforced SiOC ceramic with enhanced mechanical and microwave absorption properties

Construction of Si<sub>3</sub>N<sub>4</sub>/SiO<sub>2</sub>/SiC-Y<sub>2</sub>Si<sub>2</s ub>O<sub>7</sub> composite ceramics with gradual impedance matching structure for high-temperature electromagnetic wave absorption

In-situ Reaction Strategy Toward Sc2O3 Reinforced SiOC Ceramics for Enhanced Microwave Absorption Performance

Multifunction properties of SiOC reinforced with carbon fiber and in-situ SiC nanowires

YbSiOC ceramics with a multidimensional nanostructure for high-efficiency electromagnetic wave absorption

Simultaneously Enhancing Mechanical and Microwave Absorption Properties of Cf/SiC Composites Via SiC Nanowires Additions

Enhanced microwave-absorption properties of polymer-derived SiC/SiOC composite ceramics modified by carbon nanowires

Design of Multilayer Cauliflower-Like Structure SiO2/SiC–Y2Si2O7 Composite Ceramics As High-Efficiency Electromagnetic Wave Absorbers

Preparation, mechanical, dielectric and microwave absorption properties of hierarchical porous SiCnw-Si3N4 composite ceramics

Impedance matching optimization of SiCf/Si3N4–SiOC composites for excellent microwave absorption properties

SiCnws/CNTs/Cf-C/SiOC Composites with Multi-Scale Lossy Phases for Simultaneous Electromagnetic Wave Absorption and Thermal Insulation

Construction of Compound Interface in SiCf/mullite Ceramic-Matrix Composites for Enhanced Mechanical and Microwave Absorbing Performance

Synthesis and High Electromagnetic Wave Absorption Performance of Carbon-Enriched Porous SiOC Ceramics

Bidirectional periodic pore structure Si-C-N multiphase ceramic with high thermostability and excellent microwave absorption properties over a wide temperature range

Design and Fabrication of Al2O3f/SiCN Composite with Excellent Microwave Absorbing and Mechanical Properties

Multiscale Designed SiCf/Si3N4 Composite for Low and High Frequency Cooperative Electromagnetic Absorption

Preparation of SiC Nanowire/Carbon Fiber Composites with Enhanced Electromagnetic Wave Absorption Performance

Carbon Fiber/si3n4 Composites with SiC Nanofiber Interphase for Enhanced Microwave Absorption Properties

A high-temperature structural and wave-absorbing SiC fiber reinforced Si3N4 matrix composites

Sandwich-like SiCnw/C/Si3N4 Porous Layered Composite for Full X-band Electromagnetic Wave Absorption at Elevated Temperature

Enhanced Electromagnetic Wave Absorption of SiOC/Porous Carbon Composites