Abstract:In this study, the effect of the mechanical stability of residual austenite in a carburizing layer on the wear performance was explored. First, different amounts of residual austenite were obtained by quenching and cooling 23CrNi3MoA steel after carburization. The effects of the volume fraction, size, and distribution of the residual austenite on the stability and wear performance were investigated. Second, scanning electron microscopy (SEM), transmission electron microscopy (TEM), focused ion beam (FIB), and electron backscatter diffraction (EBSD) analyses were used to characterize the severely deformed layer under friction. In addition, the impacts of the size, morphology, content, and distribution of residual austenite on the wear performance were analyzed. The final results indicated that as the k of the residual austenite decreased, the wear performance of the sample first increased and then decreased. The wear performance improved due to the reduced stability of the residual austenite, which facilitated phase transformation of the residual austenite under friction. The phase transformation of residual austenite into martensite increased the hardness of the wear surface layer. In addition, nanotwinned martensite formed in the severe wear deformation layer. The generation of nanotwins could effectively hinder dislocation movement and store high-density dislocations near the twin boundaries, thereby improving the strength of the wear layer and reducing the wear rate. However, when the residual austenite stability continued to decrease, a large amount of block-like austenite at the grain boundaries underwent excessive plastic deformation during friction. This excessive plastic deformation increased the number of dislocations and led to incoordination between the phase-transformed martensite and the original martensite during deformation. Therefore, crack nucleation increased, and crack propagation accelerated, directly increasing the amount of wear on the wear surface and decreasing the overall wear resistance of the material. In this article, the wear mechanism of residual austenite during dry sliding friction was elucidated, and a basis for reasonable control of residual austenite in production work was provided.

Impact wear mechanism of 2Cr13 steel under small stress multi-impact conditions

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Influence mechanism of grinding surface quality of 20CrMnTi steel on contact failure

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Microstructure evolution and mechanical properties of martensite stainless steel during repetitive high stress Loading-Unloading with small plastic deformation

Microstructural and mechanical analysis on the shock-induced spalling with structural transformation in single crystal iron: Atomistic simulations

Microstructures of surface white layer and internal white adiabatic shear band

Investigation of damage mechanisms related to microstructural features of ferrite-cementite steels via experiments and multiscale simulations

The Failure Models Induced by White Layers During Impact Wear

Effects of TiC and residual austenite synergistic strengthening mechanism on impact-abrasive wear behavior of bainite steel

Impact wear behavior of laser hardened hypoeutectoid 2Cr13 martensite stainless steel

Atomistic Scale Behaviors of Intergranular Crack Propagation along Twist Grain Boundary in Iron under Dynamic Loading

Effect of Laser Shock Peening Impact Numbers on Microstructure and Tribological Characteristics of GCr15 Steel

Wear behavior and damage characterization for AISI 52100 bearing steels: Effect of hardness and spherical carbides

Micromechanism of Plastic Accumulation and Damage Initiation in Bearing Steels under Cyclic Shear Deformation: A Molecular Dynamics Study

Delamination mechanism of white layer under high stress impact wear

Analyzing the effect of the mechanical stability of residual austenite on the wear performance

Cyclic deformation behaviors and microstructure evolution mechanisms of 42CrMo steels under different heat-treatment states

Mechanism of Microscopic Fracture of Typical Shell Steel under Impact Loading

A Study On The Dynamic Characteristics Of Abrasion For High-Chromium Alloys