Abstract:Plasma-assisted ammonia synthesis in a packed dielectric barrier discharge (DBD) reactor at atmospheric pressure is presented in this work. A broad range of materials (commonly used as catalyst supports) with various chemical properties (acidic α-Al2O3, anatase TiO2 and basic MgO, CaO), surface area and porosity (α-Al2O3 and γ-Al2O3), dielectric properties (quartz wool, TiO2, and BaTiO3), have been investigated for synergetic effects by packing them in the discharge zone of the DBD reactor. All the materials showed a substantial effect on ammonia production, which can be explained solely as a result of the effect of packing on plasma formation and not by a synergy between plasma and surface catalysis. Size and shape of packing material are found to be the key parameters in enhancing the performance. Quartz wool, closely followed by γ-Al2O3, produces the highest concentration of ammonia at 2900 and 2700 ppm, respectively, due to their ability to generate dense filamentary microdischarges. Particles with a diameter of 200 µm yielded a 64% higher concentration of NH3 than 1300 µm particles—because of amplified electric field strength from increased particle-particle contact points. The specific energy input per unit volume also displayed a significant impact on ammonia production. The process parameters such as N2/H2 feed flow ratio, total flow rate and argon dilution were also investigated. In contradiction to catalytic ammonia synthesis, plasma-assisted synthesis favors a N2/H2 feed ratio ≥2 instead of the stoichiometric feed ratio of 0.33. At 0.4 l min−1, 3500 ppm of ammonia was produced with an energy efficiency of 1.23 g NH3 kWh−1. Dilution with 2–5 vol% of argon yielded a 2% improvement in the concentration and energy efficiency, which seems insignificant considering the added practical challenges posed by gas separation. To achieve even higher ammonia concentration and energy efficiencies, it is recommended to support transition metal on γ-Al2O3.

Unraveling the different regimes arisen during plasma ammonia synthesis on mesoporous silica SBA-15 through plasma diagnostics

Identifying Regimes During Plasma Catalytic Ammonia Synthesis

Plasma ammonia synthesis over mesoporous silica SBA-15

Ammonia Synthesis Via Nitrogen-Coupled Methane Conversion at Ambient Temperature and Plasma Conditions

Hydrogenation of Plasma-Excited Nitrogen over an Alumina Catalyst for Ammonia Synthesis

Non-thermal Atmospheric Plasma Synthesis of Ammonia in a DBD Reactor Packed with Various Catalysts

Effect of surface porosity of catalytic supports on plasma-assisted catalysis for ammonia synthesis

Deciphering the synergy between plasma and catalyst support for ammonia synthesis in a packed dielectric barrier discharge reactor

Plasma-catalytic Synthesis of Ammonia over Ru-based Catalysts: Insights into the Support Effect

Plasma‐catalytic Ammonia Synthesis via Eley‐Rideal Reactions: a Kinetic Analysis

Al2O3-Supported Transition Metals for Plasma-Catalytic NH3 Synthesis in a DBD Plasma: Metal Activity and Insights into Mechanisms

Plasma-assisted ammonia synthesis in a packed-bed dielectric barrier discharge reactor: roles of dielectric constant and thermal conductivity of packing materials

Ammonia synthesis by plasma catalysis in an atmospheric RF helium plasma

Plasma-enabled sustainable ammonia synthesis at atmospheric pressure: the role of catalysts on synergistic effect

Dielectric barrier discharge plasma-assisted catalytic ammonia synthesis: synergistic effect of Ni-MOF-74 catalyst and nanosecond pulsed plasma

Reinforcement of fluidized catalysts with DBD plasma assisted for green ammonia synthesis

Tailoring the surface acidity of catalyst to enhance nonthermal plasma-assisted ammonia synthesis rates

Shielding Protection by Mesoporous Catalysts for Improving Plasma-Catalytic Ambient Ammonia Synthesis

Plasma-catalytic ammonia synthesis on Ni catalysts supported on Al2O3, Si-MCM-41 and SiO2

Ru-based multifunctional mesoporous catalyst for low-pressure and non-thermal plasma synthesis of ammonia

Overcoming ammonia synthesis scaling relations with plasma-enabled catalysis