Abstract:A fundamental understanding of plasma-catalyst interactions is important for understanding reaction mechanisms, optimizing the catalyst, and increasing the efficiency of plasma-assisted catalytic process for ammonia (\ce{NH3}) synthesis. We report on the effect of the surface porosity of the catalyst support on this reaction carried out in a coaxial dielectric barrier discharge (DBD) plasma reactor. The discharge was created using a variable AC applied voltage at room temperature and near atmospheric pressure (550 Torr). Two catalyst supports were compared: porous silica (\ce{SiO2}) ceramic beads and smooth, non-porous soda lime glass beads of almost equal diameter ($\sim$1.5 mm) were used. \ce{N2} conversion and the \ce{NH3} synthesis rate was increased with increasing voltage for both supports, but the energy yield for \ce{NH3} production increased for the \ce{SiO2} beads and decreased for the glass beads. All three of these parameters were always higher when using the \ce{SiO2} beads, which suggests that porosity can be a small advantage for plasma assisted \ce{NH3} synthesis. Discharge and plasma properties were estimated from Lissajous plots and using calculations with the BOLSIG+ software. The effect of different catalyst supports on the physical properties of the discharge was negligible. High resolution optical emission spectra (OES) were used to explore the evolution of gas phase active species, \ce{N2+}, atomic N, electronically excited \ce{N2}, and atomic H (H$_\alpha$, H$_\beta$), in the plasma in the presence of both supports. The relative concentration of these species was lower in the case of the porous \ce{SiO2} beads for all applied voltages, which suggests that surface reactions are more significant than gas phase reactions for the formation of \ce{NH3} in plasma assisted \ce{NH3} synthesis.

Plasma-catalytic Synthesis of Ammonia over Ru-based Catalysts: Insights into the Support Effect

Non-thermal Atmospheric Plasma Synthesis of Ammonia in a DBD Reactor Packed with Various Catalysts

Effect of CaO-modified Al2O3 on the synthesis of ammonia by DBD plasma

Hydrogenation of Plasma-Excited Nitrogen over an Alumina Catalyst for Ammonia Synthesis

Plasma-enabled sustainable ammonia synthesis at atmospheric pressure: the role of catalysts on synergistic effect

Plasma-catalytic ammonia synthesis on Ni catalysts supported on Al2O3, Si-MCM-41 and SiO2

Effect of surface porosity of catalytic supports on plasma-assisted catalysis for ammonia synthesis

Ammonia Decomposition over Low-loading Ruthenium Catalyst Achieved through "Adiabatic" Plasma Reactor

Ammonia synthesis over Ru/C catalysts with different carbon supports promoted by barium and potassium compounds

Al2O3-Supported Transition Metals for Plasma-Catalytic NH3 Synthesis in a DBD Plasma: Metal Activity and Insights into Mechanisms

Ru nanoparticles on Y2O3 with enhanced metal-support interaction for efficient ammonia synthesis

Ru-based multifunctional mesoporous catalyst for low-pressure and non-thermal plasma synthesis of ammonia

Synergizing Surface Hydride Species and Ru Clusters on Sm2O3 for Efficient Ammonia Synthesis

Effect of Ultrasonic Treatment of Activated Carbon Support on Catalytic Performance of Ru/Ac for Ammonia Synthesis

Enhanced Activity of Ru-based Catalysts for Ammonia Decomposition Through Nitrogen Doping of Hierarchical Porous Carbon Carriers

Carbon-free hydrogen production via plasma-catalytic ammonia decomposition over transition metal-based catalysts: In situ probing by DRIFTS and SVUV-PIMS

Ammonia-treated Activated Carbon As Support of Ru-Ba Catalyst for Ammonia Synthesis

Ammonia decomposition over Ru and Ni catalysts supported on fumed SiO2, MCM-41, and SBA-15

Kinetics Study on Ammonia Synthesis over AC-supported Ru Catalyst

Plasma‐promoted ammonia decomposition over supported ruthenium catalysts for COx‐free H2 production

Effect of Preparation Methods on Catalytic Properties of Ba-Doped Nano-Mgo-Supported Ru Catalyst for Ammonia Synthesis