Abstract:Plasma-assisted ammonia synthesis in a packed dielectric barrier discharge (DBD) reactor at atmospheric pressure is presented in this work. A broad range of materials (commonly used as catalyst supports) with various chemical properties (acidic α-Al2O3, anatase TiO2 and basic MgO, CaO), surface area and porosity (α-Al2O3 and γ-Al2O3), dielectric properties (quartz wool, TiO2, and BaTiO3), have been investigated for synergetic effects by packing them in the discharge zone of the DBD reactor. All the materials showed a substantial effect on ammonia production, which can be explained solely as a result of the effect of packing on plasma formation and not by a synergy between plasma and surface catalysis. Size and shape of packing material are found to be the key parameters in enhancing the performance. Quartz wool, closely followed by γ-Al2O3, produces the highest concentration of ammonia at 2900 and 2700 ppm, respectively, due to their ability to generate dense filamentary microdischarges. Particles with a diameter of 200 µm yielded a 64% higher concentration of NH3 than 1300 µm particles—because of amplified electric field strength from increased particle-particle contact points. The specific energy input per unit volume also displayed a significant impact on ammonia production. The process parameters such as N2/H2 feed flow ratio, total flow rate and argon dilution were also investigated. In contradiction to catalytic ammonia synthesis, plasma-assisted synthesis favors a N2/H2 feed ratio ≥2 instead of the stoichiometric feed ratio of 0.33. At 0.4 l min−1, 3500 ppm of ammonia was produced with an energy efficiency of 1.23 g NH3 kWh−1. Dilution with 2–5 vol% of argon yielded a 2% improvement in the concentration and energy efficiency, which seems insignificant considering the added practical challenges posed by gas separation. To achieve even higher ammonia concentration and energy efficiencies, it is recommended to support transition metal on γ-Al2O3.

Plasma-enabled sustainable ammonia synthesis at atmospheric pressure: the role of catalysts on synergistic effect

Ammonia Synthesis Via Nitrogen-Coupled Methane Conversion at Ambient Temperature and Plasma Conditions

Non-thermal Atmospheric Plasma Synthesis of Ammonia in a DBD Reactor Packed with Various Catalysts

Hydrogenation of Plasma-Excited Nitrogen over an Alumina Catalyst for Ammonia Synthesis

Sustainable Ammonia Synthesis from Nitrogen and Water by One‐Step Plasma Catalysis

Shielding Protection by Mesoporous Catalysts for Improving Plasma-Catalytic Ambient Ammonia Synthesis

Dielectric barrier discharge plasma-assisted catalytic ammonia synthesis: synergistic effect of Ni-MOF-74 catalyst and nanosecond pulsed plasma

Deciphering the synergy between plasma and catalyst support for ammonia synthesis in a packed dielectric barrier discharge reactor

Plasma-catalytic Synthesis of Ammonia over Ru-based Catalysts: Insights into the Support Effect

Unlocking Efficient Synergistic Plasma-Catalyst Ammonia Synthesis: System Optimization and Catalyst Support Screening

Plasma catalytic ammonia synthesis in a fluidized-bed DBD reactor over M/Al2O3: Enhancement of plasma-catalyst surface interaction

Nonthermal-Plasma-Catalytic Ammonia Synthesis Using Fe2O3/CeO2 Mechanically Mixed with Al2O3: Insights into the Promoting Effect of Plasma Discharge Enhancement on the Role of Catalysts

Ru-based multifunctional mesoporous catalyst for low-pressure and non-thermal plasma synthesis of ammonia

Reinforcement of fluidized catalysts with DBD plasma assisted for green ammonia synthesis

Overcoming ammonia synthesis scaling relations with plasma-enabled catalysis

Ammonia Synthesis by Radio Frequency Plasma Catalysis: Revealing the Underlying Mechanisms

Ammonia synthesis by plasma catalysis in an atmospheric RF helium plasma

Al2O3-Supported Transition Metals for Plasma-Catalytic NH3 Synthesis in a DBD Plasma: Metal Activity and Insights into Mechanisms

Hydrogen production from ammonia decomposition: Study on the synergetic effect of DBD plasma and cheap metal catalysts

Tailoring the surface acidity of catalyst to enhance nonthermal plasma-assisted ammonia synthesis rates

Importance of plasma discharge characteristics in plasma catalysis: Dry reforming of methane vs. ammonia synthesis