Abstract:Plasma-assisted ammonia synthesis in a packed dielectric barrier discharge (DBD) reactor at atmospheric pressure is presented in this work. A broad range of materials (commonly used as catalyst supports) with various chemical properties (acidic α-Al2O3, anatase TiO2 and basic MgO, CaO), surface area and porosity (α-Al2O3 and γ-Al2O3), dielectric properties (quartz wool, TiO2, and BaTiO3), have been investigated for synergetic effects by packing them in the discharge zone of the DBD reactor. All the materials showed a substantial effect on ammonia production, which can be explained solely as a result of the effect of packing on plasma formation and not by a synergy between plasma and surface catalysis. Size and shape of packing material are found to be the key parameters in enhancing the performance. Quartz wool, closely followed by γ-Al2O3, produces the highest concentration of ammonia at 2900 and 2700 ppm, respectively, due to their ability to generate dense filamentary microdischarges. Particles with a diameter of 200 µm yielded a 64% higher concentration of NH3 than 1300 µm particles—because of amplified electric field strength from increased particle-particle contact points. The specific energy input per unit volume also displayed a significant impact on ammonia production. The process parameters such as N2/H2 feed flow ratio, total flow rate and argon dilution were also investigated. In contradiction to catalytic ammonia synthesis, plasma-assisted synthesis favors a N2/H2 feed ratio ≥2 instead of the stoichiometric feed ratio of 0.33. At 0.4 l min−1, 3500 ppm of ammonia was produced with an energy efficiency of 1.23 g NH3 kWh−1. Dilution with 2–5 vol% of argon yielded a 2% improvement in the concentration and energy efficiency, which seems insignificant considering the added practical challenges posed by gas separation. To achieve even higher ammonia concentration and energy efficiencies, it is recommended to support transition metal on γ-Al2O3.

Dielectric barrier discharge plasma-assisted catalytic ammonia synthesis: synergistic effect of Ni-MOF-74 catalyst and nanosecond pulsed plasma

Ammonia Synthesis Via Nitrogen-Coupled Methane Conversion at Ambient Temperature and Plasma Conditions

Non-thermal Atmospheric Plasma Synthesis of Ammonia in a DBD Reactor Packed with Various Catalysts

Co‐Ni/MOF‐74 catalyst packed‐bed DBD plasma for ammonia synthesis

Ni‐MOF‐74 Derived Carbon‐Based Ni Catalysts for Efficient Catalytic Ammonia Synthesis via Pulsed DBD Plasma

Hydrogenation of Plasma-Excited Nitrogen over an Alumina Catalyst for Ammonia Synthesis

Deciphering the synergy between plasma and catalyst support for ammonia synthesis in a packed dielectric barrier discharge reactor

Reinforcement of fluidized catalysts with DBD plasma assisted for green ammonia synthesis

Plasma-enabled sustainable ammonia synthesis at atmospheric pressure: the role of catalysts on synergistic effect

Tailoring the surface acidity of catalyst to enhance nonthermal plasma-assisted ammonia synthesis rates

Unlocking Efficient Synergistic Plasma-Catalyst Ammonia Synthesis: System Optimization and Catalyst Support Screening

Dielectric barrier discharge plasma catalysis as an alternative approach for the synthesis of ammonia: a review

Ammonia Synthesis via Membrane Dielectric-Barrier Discharge Reactor Integrated with Metal Catalyst

Ru-based multifunctional mesoporous catalyst for low-pressure and non-thermal plasma synthesis of ammonia

Shielding Protection by Mesoporous Catalysts for Improving Plasma-Catalytic Ambient Ammonia Synthesis

Plasma-assisted catalysis for ammonia synthesis in a dielectric barrier discharge reactor: key surface reaction steps and potential causes of low energy yield

Effectiveness of Noble Gas Addition for Plasma Synthesis of Ammonia in a Dielectric Barrier Discharge Reactor

Plasma catalytic ammonia synthesis in a fluidized-bed DBD reactor over M/Al2O3: Enhancement of plasma-catalyst surface interaction

A Comparative Study of In- and Post-Plasma Catalysis Configurations for Ammonia Synthesis: Effect of Temperature

Ammonia Synthesis by Radio Frequency Plasma Catalysis: Revealing the Underlying Mechanisms

Sustainable Ammonia Synthesis from Nitrogen and Water by One‐Step Plasma Catalysis