Abstract:Plasma-catalytic synthesis of ammonia has the potential to store hydrogen on a decentralized scale under mild conditions by consuming the distributed renewable energy power. Suitable catalyst supports can promote plasma-catalytic ammonia synthesis (PCAS). The impact of the support (Al2O3, Si-MCM-41 and SiO2) on the performance of the Ni catalysts for PCAS was investigated under ambient pressure without heating under various N2:H2 ratios, discharge powers, and flow rates. Results indicated that Ni/Al2O3 (Ni–Al) had an energy yield of 0.47 g NH3/kWh at an NH3 concentration of 13,670 ppm or 1.15 g NH3/kWh at an NH3 concentration of 3086 ppm and Ni/Si-MCM-41 (Ni-SiM) had a highest ammonia production rate of 6311 μmol/(gcat·h) with the NH3 concentration and energy yield closed to those of Ni–Al. The performances of the Ni–Al and Ni-SiM catalysts were maintained for at least 50 h, and the structures of the catalysts undergoing the 50-h reaction did not change significantly. The role of the support was revealed via several characterizations, suggesting that the number of weak acid sites, Ni dispersion, and Ni-support interactions of the catalysts, which are vital for PCAS, can be affected by the type and structure of the support. In situ and ex situ spectral measurements for some important species in PCAS were performed to test the hypothesis that the reaction takes place over the catalyst and in the gas phase. According to the in-situ DRIFTS in the N2–H2 plasma, ex-situ N 1s XPS, and NH3-TPD, it was speculated that the generated NH3 absorbed on the weak acid site could desorb in a timely manner to accelerate the regeneration of the active sites of the catalyst in the N2–H2 plasma, which resulted in a higher ammonia concentration for PCAS.

Ru-based multifunctional mesoporous catalyst for low-pressure and non-thermal plasma synthesis of ammonia

Ammonia Synthesis Via Nitrogen-Coupled Methane Conversion at Ambient Temperature and Plasma Conditions

Non-thermal Atmospheric Plasma Synthesis of Ammonia in a DBD Reactor Packed with Various Catalysts

Hydrogenation of Plasma-Excited Nitrogen over an Alumina Catalyst for Ammonia Synthesis

Dielectric barrier discharge plasma-assisted catalytic ammonia synthesis: synergistic effect of Ni-MOF-74 catalyst and nanosecond pulsed plasma

Plasma-enabled sustainable ammonia synthesis at atmospheric pressure: the role of catalysts on synergistic effect

Co‐Ni/MOF‐74 catalyst packed‐bed DBD plasma for ammonia synthesis

Tailoring the surface acidity of catalyst to enhance nonthermal plasma-assisted ammonia synthesis rates

Plasma-catalytic Synthesis of Ammonia over Ru-based Catalysts: Insights into the Support Effect

Atmospheric Pressure Ammonia Synthesis on AuRu Catalysts Enabled by Plasmon-Controlled Hydrogenation and Nitrogen-species Desorption

Ammonia synthesis by plasma catalysis in an atmospheric RF helium plasma

Catalytic Ammonia Formation in a Microreaction Chamber with Electrically Intensified Arc Plasma

Ni‐MOF‐74 Derived Carbon‐Based Ni Catalysts for Efficient Catalytic Ammonia Synthesis via Pulsed DBD Plasma

Ammonia Decomposition over Low-loading Ruthenium Catalyst Achieved through "Adiabatic" Plasma Reactor

Reinforcement of fluidized catalysts with DBD plasma assisted for green ammonia synthesis

Efficient ammonia synthesis from the air using tandem non-thermal plasma and electrocatalysis at ambient conditions

Plasma-catalytic ammonia synthesis on Ni catalysts supported on Al2O3, Si-MCM-41 and SiO2

Highly efficient ammonia synthesis at low temperature over a Ru–Co catalyst with dual atomically dispersed active centers

Non-thermal plasma-assisted ammonia production: A review

Sustainable ammonia synthesis from air by the integration of plasma and electrocatalysis techniques

Ruthenium Complex Hydride Catalyst as a Platform for Ammonia Synthesis: The Effect of Alkali or Alkaline Earth Elements